Skoda Fabia VRS 2012. Auto lights retrofit OEM
- ciclo
- Bling Bling Diamond Member
- Posts: 7841
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: Auto lights retrofit
Process
1st STEP
These are the two new 0.5mm2 wires that YOU must install for your LED DRLs (bumper).
https://imgur.com/TmLRVDb
Notes
1- It's mandatory.
2- You cannot use the original wires, original DRLs installation will be isolated --> Note 3.
3- Remove and isolate the original terminal/blue wire T17/3 from the light switch connector. This wire will be replaced by another one that will be included in a new harness.
4- I will give you the BCM contact terminals for these new two wires. I don't have contact terminals for your T3 DRLs connectors.
---
2nd STEP
BCM Max
Wiring adaptation.
It consists of two new harnesses:
1- From the fuse box to the BCM. (+30, HB, LB)
2- From the BCM to the light switch. (DRLs, Rear fog light, 58, 58d)
I will manufacture these two harnesses and tell you how to install them through images.
---
3rd STEP
Automatic lights wiring. Installation and Coding.
I will provide you with this wiring.
---
My condition to continue in this process/project.
I sell you the wiring/harnesses of steps 2 and 3.
81€ (automatic lights wiring) + 35€ (BCM adaptation harnesses) + 16€ (shipping costs) = 132€
Paypal fees, packaging, and my knowledges included. (free)
Please tell me if you agree. Thanks.
1st STEP
These are the two new 0.5mm2 wires that YOU must install for your LED DRLs (bumper).
https://imgur.com/TmLRVDb
Notes
1- It's mandatory.
2- You cannot use the original wires, original DRLs installation will be isolated --> Note 3.
3- Remove and isolate the original terminal/blue wire T17/3 from the light switch connector. This wire will be replaced by another one that will be included in a new harness.
4- I will give you the BCM contact terminals for these new two wires. I don't have contact terminals for your T3 DRLs connectors.
---
2nd STEP
BCM Max
Wiring adaptation.
It consists of two new harnesses:
1- From the fuse box to the BCM. (+30, HB, LB)
2- From the BCM to the light switch. (DRLs, Rear fog light, 58, 58d)
I will manufacture these two harnesses and tell you how to install them through images.
---
3rd STEP
Automatic lights wiring. Installation and Coding.
I will provide you with this wiring.
---
My condition to continue in this process/project.
I sell you the wiring/harnesses of steps 2 and 3.
81€ (automatic lights wiring) + 35€ (BCM adaptation harnesses) + 16€ (shipping costs) = 132€
Paypal fees, packaging, and my knowledges included. (free)
Please tell me if you agree. Thanks.
-
- Bronze Member
- Posts: 182
- Joined: Tue Feb 12, 2019 2:53 pm
- Drives: Polo 6R 1.2 tsi , Skoda Fabia 5J Vrs 1.4
- Location: Greece
Re: Auto lights retrofit
Hello my friend
of course and I agree !!!
I will send the information of auto light switch (it is from Skoda Yeti ) and interior dimmer switch which is from Skoda Octavia 2
From you I want to help me to choose BCM max part number .
Regards
VV
of course and I agree !!!
I will send the information of auto light switch (it is from Skoda Yeti ) and interior dimmer switch which is from Skoda Octavia 2
From you I want to help me to choose BCM max part number .
Regards
VV
-
- Bronze Member
- Posts: 182
- Joined: Tue Feb 12, 2019 2:53 pm
- Drives: Polo 6R 1.2 tsi , Skoda Fabia 5J Vrs 1.4
- Location: Greece
-
- Bronze Member
- Posts: 182
- Joined: Tue Feb 12, 2019 2:53 pm
- Drives: Polo 6R 1.2 tsi , Skoda Fabia 5J Vrs 1.4
- Location: Greece
- ciclo
- Bling Bling Diamond Member
- Posts: 7841
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: Auto lights retrofit
Thank you very much for the images, everything under control.
In my humble opinion this is one of the best decisions you have made in this kind of matters.
We will even try to make the 'new' Dimmer Octavia 2 work properly (already planned ).
Recommended BCMs:
7E0937090B
7E0937090C
7E0937090D
Contact firegrafik (Alexander), forum member with a lot of experience in these matters, he will help you get one of these BCM Max. This is what most of the members of this forum do that make these types of adaptations/installations.
This is the best advice I can give you about it.
I will send an email to Alexander for him to read this post.
While you are waiting to receive your new BCM Max, I will be manufacturing your wiring looms, I will inform you here ...
Perfect! (supreme)VASILEIOS1972 wrote: ↑Fri Jul 26, 2019 11:40 am Hello my friend
of course and I agree !!!
I will send the information of auto light switch (it is from Skoda Yeti ) and interior dimmer switch which is from Skoda Octavia 2
From you I want to help me to choose BCM max part number .
Regards
VV
In my humble opinion this is one of the best decisions you have made in this kind of matters.
We will even try to make the 'new' Dimmer Octavia 2 work properly (already planned ).
Recommended BCMs:
7E0937090B
7E0937090C
7E0937090D
Contact firegrafik (Alexander), forum member with a lot of experience in these matters, he will help you get one of these BCM Max. This is what most of the members of this forum do that make these types of adaptations/installations.
This is the best advice I can give you about it.
I will send an email to Alexander for him to read this post.
While you are waiting to receive your new BCM Max, I will be manufacturing your wiring looms, I will inform you here ...
-
- Bronze Member
- Posts: 182
- Joined: Tue Feb 12, 2019 2:53 pm
- Drives: Polo 6R 1.2 tsi , Skoda Fabia 5J Vrs 1.4
- Location: Greece
Re: Auto lights retrofit
Hello my friend, can you provide me bcm with the wiring harness, and pay you for the total kit?
- ciclo
- Bling Bling Diamond Member
- Posts: 7841
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: Auto lights retrofit
Maybe, I'll contact to Alexander ... wait please.
-
- Bronze Member
- Posts: 182
- Joined: Tue Feb 12, 2019 2:53 pm
- Drives: Polo 6R 1.2 tsi , Skoda Fabia 5J Vrs 1.4
- Location: Greece
- ciclo
- Bling Bling Diamond Member
- Posts: 7841
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: Auto lights retrofit
Wait please, good friends have to do the appropriate checks, it can take a couple of days.
You may receive more than you expect.
The payment will be at the end, I will inform you. (this shouldn't worry you now)
You may receive more than you expect.
The payment will be at the end, I will inform you. (this shouldn't worry you now)
-
- Bronze Member
- Posts: 182
- Joined: Tue Feb 12, 2019 2:53 pm
- Drives: Polo 6R 1.2 tsi , Skoda Fabia 5J Vrs 1.4
- Location: Greece
- ciclo
- Bling Bling Diamond Member
- Posts: 7841
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: Auto lights retrofit
I will send you the BCM Max along with the wiring looms.
Now is the long wait to receive BCM (two weeks) and send the products (1 week) to you, I guess it will take three or four weeks for you to receive them.
When all the products are ready to send them to your address you will make the payment. I will contact you by private message, be patient please, it will be worth it.
Now is the long wait to receive BCM (two weeks) and send the products (1 week) to you, I guess it will take three or four weeks for you to receive them.
When all the products are ready to send them to your address you will make the payment. I will contact you by private message, be patient please, it will be worth it.
-
- Bronze Member
- Posts: 182
- Joined: Tue Feb 12, 2019 2:53 pm
- Drives: Polo 6R 1.2 tsi , Skoda Fabia 5J Vrs 1.4
- Location: Greece
Re: Auto lights retrofit
Ok great , can you tell me the total price of the retrofit kit ?ciclo wrote: ↑Fri Jul 26, 2019 8:55 pm I will send you the BCM Max along with the wiring looms.
Now is the long wait to receive BCM (two weeks) and send the products (1 week) to you, I guess it will take three or four weeks for you to receive them.
When all the products are ready to send them to your address you will make the payment. I will contact you by private message, be patient please, it will be worth it.
Regards
VV
- ciclo
- Bling Bling Diamond Member
- Posts: 7841
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: Auto lights retrofit
Yes, by private message.
PS: Please don't use private messaging for technical questions, I will not answer. Technical issues should be shared in the forum. Here.
PS: Please don't use private messaging for technical questions, I will not answer. Technical issues should be shared in the forum. Here.
-
- Bronze Member
- Posts: 182
- Joined: Tue Feb 12, 2019 2:53 pm
- Drives: Polo 6R 1.2 tsi , Skoda Fabia 5J Vrs 1.4
- Location: Greece
Re: Auto lights retrofit
Hello Fernando again
I was wondering after bcm installation
If it is possible to have corner lights function
Or other upgrades
I know that my car doesn't have a fog lights
Regards
VV
I was wondering after bcm installation
If it is possible to have corner lights function
Or other upgrades
I know that my car doesn't have a fog lights
Regards
VV
- ciclo
- Bling Bling Diamond Member
- Posts: 7841
- Joined: Sun Feb 24, 2013 10:20 am
- Drives: 6R'13/G7.5'19
- Location: Earth ♥, sPAIN, Magiclands (Mordor).
- Contact:
Re: Auto lights retrofit
Yes, your New BCM Max 7E0937090C supports cornering lights... and all the known functions that are possible for PQ25.