ciclo wrote:Help. No hurry.
Picture from 6R WRC fusebox (SB)
Please.
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Fri Feb 03, 2017 5:42 pm
by iichel
i guess he wants to remove the trim. it's not a sepereate part but part of the dashboard. it is melted into the dashboard, you'll need to say, drill or melt it out.
i wouldn't recommend to do this.
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Fri Feb 03, 2017 5:45 pm
by iichel
ciclo wrote:
ciclo wrote:Help. No hurry.
Picture from 6R WRC fusebox (SB)
iichel wrote:
I see. I have some money available for a T6 BCM. Any recommendations on the right Z-code?
There are so many, high window rear door, mechancally locking tailgate etc etc. i don't know it anymore, too many options
The only one I know for sure is 8T1
7E0937090B ZTZ
This one will meet all your expectations.
434 Mhz
Led Headlights
HBA
Side Assist
RDK (if it is possible with the Amarok system)
CCS, ACC...
Interface for external use.
Etc...
Highline, Executive...
If you also want to install comfort tailgate: Z-code = 07W
It would be difficult (compatible parts) to install in our tiny 6R, but not impossible.
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sat Feb 04, 2017 8:49 am
by iichel
Gracias señor ciclo!
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sat Feb 04, 2017 1:07 pm
by iichel
The guys on the Polo6R FReunde forum posted 2 fuse boxes of the WRC
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sat Feb 04, 2017 7:21 pm
by ciclo
iichel wrote:The guys on the Polo6R FReunde forum posted 2 fuse boxes of the WRC
My sincere thanks to all three.
Elsawin and Erwin (last update) are a little joke about the WRC diagrams. I suppose to hide some information ...
I suppose that:
As for 31 fuse
As for S1, S2 fuses
And precisely the 87 terminal was the reason I asked for the images, due to other incongruities in other diagrams about the +15 terminal related with other systems... (I have to do some tests to be able to continue talking... )
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sat Feb 04, 2017 7:50 pm
by iichel
Are you planning to retrofit the 2.0 TFSI by any chance?
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Mon Feb 06, 2017 6:17 pm
by ciclo
No, my 1.2 TSI 90HP engine is perfect for me.
It has an awesome acceleration 0-65 km/h ...
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Mon Feb 06, 2017 6:25 pm
by iichel
mine is even faster 65 km/h - 0 kmh
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Mon Feb 06, 2017 7:23 pm
by iichel
rain closing:
09 address -> Coding.4 Byte 6 bit — rain closing active 8 byte 0 bit — rain light sensor installed 14 Byte 1 bit — rain sensor functions active,Subunit RLS coding0 Byte 2 bit Rain closing active
Thanks iichel. But... what's new in that coding? I have that codification for three years and in my 6R does not work ... I do not want it to work.
------------------------
--
-
-
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Tue Feb 07, 2017 6:09 am
by ciclo
iichel, did you get the Assistants menu in your MFA when you installed the Lane Assist? I was reviewing this Autoscan and I remembered your 7E0 Lane Assist.
hmm... what would happen if you test with your last BCM Bytes (26,27,28,29) ... 50 03 28 04 (faster will be all HEX at the same time 50032804 copy-paste).
hmm... Gateway in your case 042201 Please, report VCDS faults.
-------
BTW, the solution for badufay (VWVortex)... to disable the DRL wink with turn signal. (Byte23 Bit7 = unmarked)
7B994BBE08AB0F0008392080240894C54BC6722E60015170B0A050032844
To display the oil temperature in the MFD+ (MFA, MFI - High, plus) the oil temp sensor is required and enable it in the MFD+ menu.
Bachecco 
