UK-POLOS.NET - THE VW Polo Forum

ciclo wrote:By the way, I forgot to mention that the humidity sensor function works perfectly. Pleasantly surprised.

Excellent!!! I recommend it 100% (or more).

Does it automatically switch on the airconditioning? I'm curious to its function

iichel wrote:

ciclo wrote:By the way, I forgot to mention that the humidity sensor function works perfectly. Pleasantly surprised.

Excellent!!! I recommend it 100% (or more).

Does it automatically switch on the airconditioning? I'm curious to its function

I'm not sure how it functions, but I'm sure when the humidity sensor didn't work, you re going to have lots of unnecessary condensation around the windscreen. I think it's a must have sensor in climatronic system.


Sent from my iPhone using Tapatalk

benzinkopf wrote:... and im not sure you notice that it can be opened and I can store the coin battery for remote as spare.


Sent from my iPhone using Tapatalk

The same, I am not sure if you have reviewed the pictures on the previous page.

Sent from my iDrums using space waves...

iichel wrote:

ciclo wrote:By the way, I forgot to mention that the humidity sensor function works perfectly. Pleasantly surprised.

Excellent!!! I recommend it 100% (or more).

Does it automatically switch on the airconditioning? I'm curious to its function

No.

From the data delivered by the humidity and temperature sensor in the base of the interior mirror, the Climatronic control unit calculates the dew point temperature of the air – that is, the temperature at which the air humidity would condense. An infrared sensor remotely measures the radiated heat on the windscreen, and calculates the window temperature. To prevent the windows from misting up, Climatronic regulates the volume of air projected on to the windscreen and, with the compressor switched on, also the air humidity inside the car. Relative humidity based on interior temperature can also be kept at a pleasant level.

ciclo wrote:

benzinkopf wrote:... and im not sure you notice that it can be opened and I can store the coin battery for remote as spare.


Sent from my iPhone using Tapatalk

The same, I am not sure if you have reviewed the pictures on the previous page.

Ok. My bad. It turns out, i missed a lot of posted pictures and gallery because I'm viewing from mobile Tapatalk. There must be some bugs in the apps. !!!

iichel wrote:Lol I need to get myself one of those

In fact, you are also in the list. Just i ve to wait till theres better logistics to your front door! [emoji1362]


Sent from my iPhone using Tapatalk

ciclo wrote:New mod/discovery (VCDS)

Backlit Hazard Button. PQ25

And the winner is:

Address 09: BCM Adaptation ---> channel 68 (from 0 to 1)

Tested on my 7e0-090zhh. Not working. Maybe its for T5/T6 bcm only?



Sent from my iPhone using Tapatalk

ciclo wrote:New mod/discovery (VCDS)

Backlit Hazard Button. PQ25

https://www.youtube*.com/watch?v=7T1_yIGqznM

How does it work?

- It works with the light switch in '0' position, or with the light switch in the 'AUTO' position and with the lights off.
- It turns on when you press the unlock button on the remote to open the car.
- It turns off when you press the lock button on the remote to close the car.


And the winner is:

Address 09: BCM Adaptation ---> channel 68 (from 0 to 1)

Work perfectly for me (BCM 7E0937090B)

benzinkopf wrote:

ciclo wrote:New mod/discovery (VCDS)

Backlit Hazard Button. PQ25

And the winner is:

Address 09: BCM Adaptation ---> channel 68 (from 0 to 1)

Tested on my 7e0-090zhh. Not working. Maybe its for T5/T6 bcm only?

No.
Try it with this BCM viewtopic.php?f=56&t=69026&p=520775#p520773
However I will have to try it with my previous 7E0937090 BCM (8IT, Executive )

benji58 wrote:Work perfectly for me (BCM 7E0937090B)

ciclo wrote: No.
Try it with this BCM viewtopic.php?f=56&t=69026&p=520775#p520773
However I will have to try it with my previous 7E0937090 BCM (8IT, Executive )

Unfortunately. The bcm still in EU. [emoji23]
So no backlight for my hazard.



Sent from my iPhone using Tapatalk

Hello Ciclo,
Is there HBA camera system + AutoDim Rear View Mirror which I can use with my existing RLS and mounting?



Sent from my iPhone using Tapatalk

Yes and no. It is possible with the Scirocco 1K8 mirror but it's not possible. I had this for a short period with my 1K8 mirror.

The scirocco mirror will work on the extended CAN (instrument cluster CAN) for HBA but for diagnosis and programming it needs to be on powertrain CAN.

iichel wrote:Yes and no. It is possible with the Scirocco 1K8 mirror but it's not possible. I had this for a short period with my 1K8 mirror.

The scirocco mirror will work on the extended CAN (instrument cluster CAN) for HBA but for diagnosis and programming it needs to be on powertrain CAN.

Noted iichel! So i have to include everything in the equation

7E0 Mirror HBA + Mounting + Cover Trim + Connector HBA + Black Glue + New RLS (or perhaps RLHS - I dont have climatronic btw) + 7E0 Stalk + IC MFA+[emoji23]


Sent from my iPhone using Tapatalk

benzinkopf wrote:7E0 Mirror HBA + Mounting + Cover Trim + Connector HBA + Black Glue + New RLS (or perhaps RLHS - I dont have climatronic btw) + 7E0 Stalk + IC MFA+[emoji23]

I will soon do it in my 6R

CNK wrote:

benzinkopf wrote:7E0 Mirror HBA + Mounting + Cover Trim + Connector HBA + Black Glue + New RLS (or perhaps RLHS - I dont have climatronic btw) + 7E0 Stalk + IC MFA+[emoji23]

I will soon do it in my 6R

Cool! Perhaps you may share the part numbers in your post soon!


Sent from my iPhone using Tapatalk