UK-POLOS.NET - THE VW Polo Forum

Final Haul of parts today, got the head unit, cubby tray and some switches. This is the total list:

4X BBS RXii's
6N2 Rear Lights + Bulbholders with bulbs
6N2 Fog Lights + switch
6N2 Silver Roof Strips
6N2 Front GTi grill
6N2 GTi Engine Cover
6N2 GTi underbonnet insulation
6N2 Gamma Tape Unit
6N2 GTi 6 CD Changer
6N2 GTi 6 CD Changer Loom
6N2 GTi rear headrests (seats maybe)
6N2 GTi Gearstick
6N2 GTi Steering Wheel + Airbag
6N2 GTi Mats
6N2 Electric Window Switches
6N2 Rear window heater switch + Hazard switch
6N2 GTi Instrument Cowel
6N2 GTi Climate Control Panel
6N2 Interior Light
6N2 Lower dash Cubby hole
6N2 Cigarette Lighter
6N2 Central locking pump
6N2 Parcel Shelf
6N2 Door pins + surrounds
6N2 undertray pipe
6N2 Door senser + rubber
6N2 GTi badges
6N2 Wheel Removal Kit
6N2 Noise Insulation Foam
6N2 Boot 12V charger + loom

The following good parts are going to scrap sadly.

6N2 GTi Seats 3 door model good condition could do with a clean.
6N2 GTi Spoiler
6N2 Stubby Mirror
6N2 GTi Front Splitter
6N2 GTi 3 door Doorcards

That is awesome, and you get all of the parts for FREE!!!!!
Good luck with the rest of the stripping, what are you going to do with all the parts? Sell them or use them?

@alexperkins - Thanks, shame I have been looking for a spoiler for ages! Oh well, just keep looking

Got to get the tracking done soon, then refit the Mk5 GTi steering wheel. The 6n2 airbag + wheel will be for sale though! Tasks are:

Tracking fix
Refit Mk5 GTi Leather Steering Wheel
Mount & connect Mk5 Polo GTi 6 CD changer if possible
Fit Mk5 Polo Colour coded roof strips
Put the GTi mats in
Fit the Audi TT LHD Pedal
Swap over my Mk5 Polo GTi gearstick for the newer one
Fit Mk5 doorpins + surrounds
Mount + wire up 6N2 GTi rear 12v boot socket

Fitted my TT RHD pedal and cleaned up the 6n2 GTi mats. Trying to source some of the edging that comes off the mats, however its a tricky find!

hey al be interested in the steering wheel
as ive got the dash and a burst airbag wheel
first dibs
cheers

Cool mate i'll let you know when its up

Cleaned and washed the front and rear mats yesterday, and fitted the pedal so got to clean the interior again so its all fresh. Outside of the car is so dirty, its been neglected these last few weeks!

Look forward to seeing some more pics

I am sure I have asked you this before but how did you wire up your rear spoiler brake light? Did you attach one wire to the brake light wire and did you cut the brown wire, and attach one to that as that is the earth wire?

Can't wait to see the new additions on the car as well

Well i've fitted the flash red colour coded roof strips, look great!

As for the spoiler, I grounded it to the main car chassis (I think) and positive came off the rear brake lights. Because it was LED, it used very little power so wasn't affected by anything.

I'll get some pictures up soon man

Oh cool, that sounds easy enough to do, I think I will do that instead of playing around with my wiring even more lol!
Keep up the good work

Finished the headlining in the faux suede with Alex today, along with 6n2 door pins, underbonnet insulation and the 6n2 GTi steering wheel. Messed around with vag com too. Also put the 6n2 GTi parcel shelf in. Pics soon

Sounds good!

All fitted, will get some pics soon mate

Well here's the pictures, included are the retrimmed headlining (A&C pillars atm), Passat estate rear wiper arm + blade, 6N2 GTi steering wheel, 6N2 Door pins (I think these need gluing down realistically), 6N2 Parcel shelf (string hangers rather than rubber), underbonnet insulation and the RXii's. Let me know what you think

I'll let the pics do the talking, Daz

Was a good weekend mate Glad we managed to get some mods done to the motor!

Great stuff! liking the progress mate,

You don't need the under bonnet insallation though!

It's all about the underbonnet shine