UK-POLOS.NET - THE VW Polo Forum

My current project: Rosa Line Bike.


The paint code is in fact L041 from my Polo.
28 inch wheels, how sporty is this!
Shimano 11 speed gearbox with overdrive in all gears.
It will have LED front and tail lights, emissions wise it's very green, runs on pasta, pizza, hamburger...
No cruise control or lane change assist unfortunately.

iichel wrote:My current project: Rosa Line Bike.


The paint code is in fact L041 from my Polo.
28 inch wheels, how sporty is this!
Shimano 11 speed gearbox with overdrive in all gears.
It will have LED front and tail lights, emissions wise it's very green, runs on pasta, pizza, hamburger...
No cruise control or lane change assist unfortunately.

I give u one idea:
take one radar (master) for side assist and make it wearable somewhere behind your back/inside backpack! install the wiring loom with waterproof connector to the led on both sides of the handle!! cool [emoji41]


Sent from my iPhone using Tapatalk

But there is no electrical power

im sure u can get the 12V power from something called dynamo.


Sent from my iPhone using Tapatalk

Hub motors
Pedal Assist.

Meanwhile I bought another diagnostic tool, etc ...

ciclo wrote: Mon Oct 16, 2017 8:33 pm
Hi lo7ro, welcome.

In English please, this is an English forum for everyone in this world.

I am sure that all your doubts / questions will be solved.

Thank you very much.
Best regards

Sorry ciclo
Hello, I'm from Spain. A long time ago we talked.
I have a bluegt pole and I would like to play something with the vagom.

To set the star / stop by default my number is 00250012242411000000
Why is it disabled by default as the number should be?

What do you find most interesting about vagcom?
I lost your mail and he had to come back here to get you jajaj and I cannot send a private..

I'm afraid it's not possible to disable the start/stop system with the VCDS system.

anybody knows what adaptation channel 73 bcm does?

Ive accidentally changed adapt channel 69 from 0 to 1. Turned out its switching off the dimmer switch for interior buttons and make the cluster full brightness.

Sent from my iPhone using Tapatalk

iichel wrote: Thu Oct 19, 2017 4:10 pm I'm afraid it's not possible to disable the start/stop system with the VCDS system.

No - that's true.
But if you can live with a malfunction notice in address 61 - you simply disconnect the small plug on the earth connection of the battery terminal.....

I hope I may ask a question for help in between.
I made someone the autolight wiring, but T73a/1 will not give power to the headlight/high beam relay.
The VCDS coding of the 7H0937090B is changed
from:
7AB02B3F08FB0F00B3380FF03FAB9ED05FC0412F7E842008200000020000
to:
7AB02B3F08F30F00B3380FF03FAB9ED05FC0412F7E842008200000020000

The guy says the headlight relay (permanent high beam) worked before the coding but not after. I'm a bit puzzled.
maybe byte 23 bit 0?

7AB02B3F08F30F00B3380FF03DAB9ED05FC0612F7E842009200000020000

Be careful, maybe it will explode...

Remember, I never correct the bytes that are not related to the question asked.

Thanks Fernando, I'll advise this coding.

lo7ro wrote: Thu Oct 19, 2017 3:14 pm
What do you find most interesting about vagcom?

Many things, are too many things. Most of them have been shared in this topic.
Your question is too generic.

iichel wrote: Thu Oct 19, 2017 8:26 pm Thanks Fernando, I'll advise this coding.

will work...