Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sat Aug 23, 2014 10:18 am
Thnks!
So the 2 red 10amp fuses are the ones i need to replace correct?
So the 2 red 10amp fuses are the ones i need to replace correct?
UK-POLOS.NET - THE VW Polo Forum
Probably the Worlds greatest Polo resource
https://uk-polos.net/
ciclo's Polo. R-line 1.2 TSI 90hp 119gr.🤝
Page 26 of 331
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sat Aug 23, 2014 10:28 am
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sat Aug 23, 2014 12:33 pm
Thanks! Brilliant stuff!
Can rely on you for just about anything lol.
Can rely on you for just about anything lol.
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sat Aug 23, 2014 1:32 pm
Let us know how you get on Jay, very interested in these!JayW wrote:Thanks! Brilliant stuff!
Can rely on you for just about anything lol.
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sat Aug 23, 2014 3:22 pm
Will do mate 
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sun Aug 24, 2014 4:14 pm
Fitted my headlights yesterday and got them working perfectly! They look stunning! Can't tell the difference between these and the genuine ones from VW. They came with 6000K HIDS already wired up and ready to go, all I had to do was plug it in. Took a whole 20 mins to get them fitted.
Here's a few snaps of them on the car
For anyone who are thinking of getting a set, I would highly recommend it!
Here's a few snaps of them on the car
For anyone who are thinking of getting a set, I would highly recommend it!
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sun Aug 24, 2014 5:13 pm
Thank you so much JayW - you've made this decision a whole lot easier! Any coding needed?
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sun Aug 24, 2014 5:21 pm
Nope, no coding at all. Just plug and play. You can code it so that the LED's come on as your DRL's but I've left it for now.
They are sublime!
They are sublime!
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sun Aug 24, 2014 5:48 pm
Jay they look great! Got link for them ? May get a pair depend on price!JayW wrote:Nope, no coding at all. Just plug and play. You can code it so that the LED's come on as your DRL's but I've left it for now.
They are sublime!
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sun Aug 24, 2014 7:09 pm
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Mon Aug 25, 2014 6:55 am
Lovely look! 
Before doing the following I need a vcds scan your BCM and info of the new harness (pictures connector 14-pin).
DRL:
If you have DRL beside the fog lights, you have to make some changes to the wiring.
Pin1 current drl... to ... Pin10 drl xenon (connector 14-pin)
And vcds coding.
Led DRL work with the light switch in position "0" and diminish its intensity while working as sidelights.
Static cornering lights:
Pin1 current fog lights .... to .... Pin14 xenon
Then pin1 both foglights vacant.
Now, you need to redo the wiring of the foglights and connect them directly to the light switch. (needed a new fuse 15amp in position 54)
Pin1 vacant both foglights ... to ... new fuse SB54 (15amp) and from SB54 to Pin8 light switch (attached to existing cable).
And vcds coding.
If you can not use position 54 by the shape of the fuse box, put the fuse in position 37 (for example)
-------------------------------------------------------------------------------
Warning to other readers:
It is necessary to have the fuse SB57 to make these changes.(DRL and fog lights)
If you have the fuse SB56, your drl are not controlled by the BCM.
Before doing the following I need a vcds scan your BCM and info of the new harness (pictures connector 14-pin).
DRL:
If you have DRL beside the fog lights, you have to make some changes to the wiring.
Pin1 current drl... to ... Pin10 drl xenon (connector 14-pin)
And vcds coding.
Led DRL work with the light switch in position "0" and diminish its intensity while working as sidelights.
Static cornering lights:
Pin1 current fog lights .... to .... Pin14 xenon
Then pin1 both foglights vacant.
Now, you need to redo the wiring of the foglights and connect them directly to the light switch. (needed a new fuse 15amp in position 54)
Pin1 vacant both foglights ... to ... new fuse SB54 (15amp) and from SB54 to Pin8 light switch (attached to existing cable).
And vcds coding.
If you can not use position 54 by the shape of the fuse box, put the fuse in position 37 (for example)
-------------------------------------------------------------------------------
Warning to other readers:
It is necessary to have the fuse SB57 to make these changes.(DRL and fog lights)
If you have the fuse SB56, your drl are not controlled by the BCM.
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Tue Aug 26, 2014 3:17 pm
Hi Ciclo,
Have you sourced the tail lights of the 6C Polo's already?
If so, I'd also be interested in getting them.
Thanks!
Have you sourced the tail lights of the 6C Polo's already?
If so, I'd also be interested in getting them.
Thanks!
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Tue Aug 26, 2014 4:54 pm
Hi sheFs
Not yet, soon I will put a tutorial (DIY) for making oneself the necessary wiring, here. I am waiting to receive the connectors.
Your polo, RHD or LHD?
If I buy taillights 6C will be here:
http://www.carparts-pros.com/index.php
Small update to RHD: http://www.uk-polos.net/view ... 88#p482188
Not yet, soon I will put a tutorial (DIY) for making oneself the necessary wiring, here. I am waiting to receive the connectors.
Your polo, RHD or LHD?
If I buy taillights 6C will be here:
http://www.carparts-pros.com/index.php
Small update to RHD: http://www.uk-polos.net/view ... 88#p482188
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Tue Aug 26, 2014 5:51 pm
Thanks for the quick response!
It's a RHD, so was hoping could source one in the UK that wouldn't require too much wiring changes!
Looking forward to your DIY.
It's a RHD, so was hoping could source one in the UK that wouldn't require too much wiring changes!
Looking forward to your DIY.
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Wed Aug 27, 2014 7:16 am