Posted: Fri Oct 03, 2008 6:54 pm
whitegtipolo
siswick
oliverpologti
t1tan619
black-a4
siswick
oliverpologti
t1tan619
black-a4
UK-POLOS.NET - THE VW Polo Forum
Probably the Worlds greatest Polo resource
https://uk-polos.net/
Honey Combe Grilles !!EVERY1 IS READY !!
Page 4 of 10
Posted: Fri Oct 03, 2008 7:28 pm
no i they original grilles remoulded thats why they are sanded off VW dont make them
Posted: Fri Oct 03, 2008 7:39 pm
The parts are imported from Singapore.. The seller in China sand off the parts no. because he don't want People in China to order directly from parts shop... U know.. Most people don't have EKTA 7.0 in China
Posted: Fri Oct 03, 2008 7:45 pm
found em ere too
http://cgi.ebay.com/ebaymotors/VW-Polo- ... enameZWD2V
works out £100 with postage to your house
http://cgi.ebay.com/ebaymotors/VW-Polo- ... enameZWD2V
works out £100 with postage to your house
Posted: Fri Oct 03, 2008 7:50 pm
Yes.. I noted that a little bit earlier from ebay... US$ 185 parts + PnP, Deliver on surface, so it takes you more than 20 days from HK to UK
Posted: Fri Oct 03, 2008 7:51 pm
dont we need the one with the holes in for the intercooler?
Posted: Fri Oct 03, 2008 7:52 pm
Sorry mate.. It's by registered airmail not surface
Posted: Fri Oct 03, 2008 8:02 pm
Well.. I think the hole is a Personal DIY cut out... just like they did on the Golf GTI..
Posted: Fri Oct 03, 2008 8:02 pm
ive just asked em if it comes with the cut out or not!Rich_T wrote:dont we need the one with the holes in for the intercooler?
Posted: Fri Oct 03, 2008 8:07 pm
as Jeff put seems to be different to the one in the picture!!Jeff GTi wrote:the ones in the photo are also not the ones we have
ours have the cutout in the drivers side vent to vent air to the standard intercooler, or for us front mount runners, to show off the hoses coming from the intercooler
Posted: Fri Oct 03, 2008 8:15 pm
the fog light mesh grille don't have the hole...it looks as shown on the Red GTI foto
Posted: Sat Oct 04, 2008 11:44 am
Ignore the photo on the thread, its the only one we had we I ran the previous GB.
Like Jeff explained...One's you get if the GB takes off are the ones with holes in drivers side fog for the IC air duct. The middle grill is hollow and the other isn't punched with holes.
For your reference look at the previous GB thread in the GB section, or look for the thread with photos of my car (last page please!).
VW logos / part numbers are off the original grills used as moulds for shaping the cast. These part numbers are probably sanded off for good reason, i.e. so that they're not classed as counterfit. No these aren't genuine VW products, however they are very close to OEM quality and much better than we expected them to be.
Like Jeff explained...One's you get if the GB takes off are the ones with holes in drivers side fog for the IC air duct. The middle grill is hollow and the other isn't punched with holes.
For your reference look at the previous GB thread in the GB section, or look for the thread with photos of my car (last page please!).
VW logos / part numbers are off the original grills used as moulds for shaping the cast. These part numbers are probably sanded off for good reason, i.e. so that they're not classed as counterfit. No these aren't genuine VW products, however they are very close to OEM quality and much better than we expected them to be.
Posted: Sat Oct 04, 2008 3:06 pm
add me to the list
Posted: Sat Oct 04, 2008 5:05 pm
whitegtipolo
siswick
oliverpologti
t1tan619
black-a4
benny_c
rich_t
siswick
oliverpologti
t1tan619
black-a4
benny_c
rich_t
Posted: Sat Oct 04, 2008 8:07 pm
whitegtipolo
siswick
oliverpologti
t1tan619
black-a4
benny_c
rich_t
bradders
siswick
oliverpologti
t1tan619
black-a4
benny_c
rich_t
bradders