Page 4 of 8
Re: Blaade,s 6R Polo GTi
Posted: Wed Jun 01, 2011 10:05 pm
by Blaade
Re: Blaade,s 6R Polo GTi
Posted: Wed Jun 01, 2011 10:48 pm
by btcc
WOW! I wasn't sure about the wheels in the previous pictures but they look much better in these.
With the wheels, the milltek and the new stance it looks like its ready for the track. You must be really pleased with it.
Re: Blaade,s 6R Polo GTi
Posted: Wed Jun 01, 2011 11:14 pm
by Blaade
btcc wrote:WOW! I wasn't sure about the wheels in the previous pictures but they look much better in these.
With the wheels, the milltek and the new stance it looks like its ready for the track. You must be really pleased with it.
I,m very happy with it to date. Think once i get the full intake on it will be more complete.
Re: Blaade,s 6R Polo GTi
Posted: Thu Jun 02, 2011 7:39 am
by kevinctr
The Yoko Parada is not so idea for this car IMHO furthermore you tuned up the car. Should have went for the Advan NeovaAD08. Lesser noise than Parada and better grip with less understeer when compared to Dunlop Sport Maxx OEM tyres. You are using back 215/40R17 size tyres?
Re: Blaade,s 6R Polo GTi
Posted: Thu Jun 02, 2011 3:50 pm
by daydotz
scrubs up well
Re: Blaade,s 6R Polo GTi
Posted: Fri Jun 03, 2011 1:04 am
by auspolo
Blaade wrote:It's MPH buddy.
Jesus!
Re: Blaade,s 6R Polo GTi
Posted: Fri Jun 03, 2011 12:08 pm
by Edi30
Very shiny, black looks so good when looked after
Re: Blaade,s 6R Polo GTi
Posted: Sun Jun 05, 2011 2:23 pm
by Trottagti
Wheels are sick mate and suit the car perfect I think... Any outside changes happening???? Color coding bits and bobs??
Would look good murdered I think...
Re: Blaade,s 6R Polo GTi
Posted: Thu Jun 09, 2011 9:25 am
by Blaade
Went to Milltek yesterday, needed a few tweeks on the exhaust, found out i was probably loosing a little power too. Anyway everything is well now. Did a few 0 to 60 runs after getting the spec 2 tyres really hot, this was the best one
https://www.youtube*.com/watch?v=R1SCJ5Ke0Tw
__________________
Re: Blaade,s 6R Polo GTi
Posted: Thu Jun 09, 2011 10:46 pm
by 9n-low
Flawless, these look so good, one day
Re: Blaade,s 6R Polo GTi
Posted: Fri Jun 10, 2011 11:42 am
by Edi30
Blaade wrote:Went to Milltek yesterday, needed a few tweeks on the exhaust, found out i was probably loosing a little power too. Anyway everything is well now. Did a few 0 to 60 runs after getting the spec 2 tyres really hot, this was the best one
https://www.youtube*.com/watch?v=R1SCJ5Ke0Tw
__________________
Looks quick
any idea of the accurate time?
Re: Blaade,s 6R Polo GTi
Posted: Sun Jun 12, 2011 3:57 pm
by bennyboy
wow that looked sub 6 seconds
i bet your happy with the result.
Re: Blaade,s 6R Polo GTi
Posted: Sun Jun 12, 2011 4:29 pm
by darrenpolo
Looks sick!
And damn thats quick!!!
Re: Blaade,s 6R Polo GTi
Posted: Sun Jun 12, 2011 6:40 pm
by Blaade
Really happy with the car. Looks wise its just about there, although I would like to pull the rear end down another 25mm. Performance is enough for me at this time until I get the front ARB, intake and uprated brakes sorted. Revo's stage 2 software is the next step when I have the intercooler made.
Re: Blaade,s 6R Polo GTi
Posted: Sun Jul 10, 2011 8:23 pm
by Blaade
Finally managed to get my new SPS unit and discovered it was set on 95ron fuel mapping. Changed it to performance C and had it dynoed yesterday.
Made 231bhp - 234lb/ft still on o/e filter/intake and intercooler :happy2:.
