Page 4 of 6

Re: Polo*'s Thread: 6n2 1.4 SE PD TDI. **Xenon's**

Posted: Tue Apr 05, 2011 3:21 pm
by vw55raz
thats an awesome guide! will give it a go after my exams / before shows

Re: Polo*'s Thread: 6n2 1.4 SE PD TDI. **Xenon's**

Posted: Wed Apr 13, 2011 12:51 pm
by Polo*
Image

Fitted them. Still need to polish them up to get the fine wet dry to a finish. As was too difficult without them on the car and holding the drill etc. But look clear enough for now.

Put the hid kit in my fogs too. Probably not practical but hey ho lol.

Re: Polo*'s Thread: 6n2 1.4 SE PD TDI. **Xenon's**

Posted: Wed Apr 13, 2011 1:41 pm
by alexperkins
Be careful drill polishing the xenons - huge amount of heat can be generated very fast and can frost them over!

Looks good though

Re: Polo*'s Thread: 6n2 1.4 SE PD TDI. **Xenon's**

Posted: Wed Apr 13, 2011 2:43 pm
by 6N2 GTI 00
The HID fogs look aweosme!

Nice update mate 8)

Re: Polo*'s Thread: 6n2 1.4 SE PD TDI. **Xenon's**

Posted: Fri Apr 15, 2011 6:18 am
by Polo*
thanks alex. i got a proper hilti low speed polishing tool (like a super sized dremel thingy) used for polishing stainless etc. so should be all good. cheers.

i do how ever need to get the leveling done as the home position is rather low. so i'll get that booked in once i have time. but loving them so far!
or can the free version of the vag-com do this?

Re: Polo*'s Thread: 6n2 1.4 SE PD TDI. **Xenon's**

Posted: Fri Apr 15, 2011 7:22 am
by alexperkins
VW dealer is the best place to get these levelled though as you havent got the levelling motors installed, and garage can do it that does headlight levelling.

Re: Polo*'s Thread: 6n2 1.4 SE PD TDI. **Xenon's**

Posted: Fri Apr 15, 2011 9:07 am
by red6n2
what bulbs you got in your fogs mate ?

me likey...

Re: Polo*'s Thread: 6n2 1.4 SE PD TDI. **Xenon's**

Posted: Sat Apr 16, 2011 6:11 am
by Polo*
they are 4300k H7R HID kits from ebay mate £30 delivered. had them in standard headlamps before.

cool. will get them leveled asap. its not that bad just want them done.

my depo crystal indicators came yesterday with the silver bulbs so they will be going on soon as. i broke the passenger clips that go into the headlight. and currently the indicator is cable tied in lol.

got my drivers window switch yesterday and also the Xenon/Standard headlight Indicator repair kit.
Image
6N0 998 121 by Evostar*, on Flickr
but... the window was working fine but only was working from passenger switch. now i have put the new drivers switch in the window wont work on either control side it just clicks up or down and does nothing.... any suggestions?

picking gti splitter up today. i was hoping it came primed. but the guy said it only comes in black plastic? is this right. £60 all in. thinking of getting the paint and taking advantage of out newly serviced spraying equipment over the cans this time.

if anyone can shed some more light on a procedure that i can follow for doing the starter motor on the TDI id appreciate that loads.
having problems with no one wanting to do the job as they are not supplying the part.....

plan to have the car up later so wll have a look for it and i believe its just simply 2 bolts and exchange?

lots to do and no time lol.

thanks all.

Re: Polo*'s Thread: 6n2 1.4 SE PD TDI. **Xenon's**

Posted: Sat Apr 16, 2011 9:54 am
by alexperkins
Whats wrong with starter motor?

They arent overly difficult to change. Removing the bolts is easy. The hardest part is getting up behind it to remove the battery cable as the space is somewhat limited

Re: Polo*'s Thread: 6n2 1.4 SE PD TDI. **Xenon's**

Posted: Sat Apr 16, 2011 1:18 pm
by Polo*
the pinion doesnt disengage after turn over. and makes a horrible loud noise.

i got a brand new s motor. i just not sure where it is on the engine. i'll have it up on the stands later and will have a looks. got 2 of us having a go so should be ok

everything else is up to date now.

aircon service, v belts, boot cv's done. airbag reset done (code was low voltage or something)

Starter Motor Fitted and works a Treat!!! :D :D :D :D :D :D :D :D

the positive cable running to the old motor litterally fell away from the motor!! so popped to halfords and got a new positive lead and all good!
the s/m was located just to the left under the battery at the front of the engine bay.

so pleased! can now start my car with people around lol

cheers for the tips alex

Re: Polo*'s Thread: 6n2 1.4 SE PD TDI. **Xenon's**

Posted: Sat Apr 16, 2011 8:42 pm
by vw55raz
glad you got it sorted buddy :)

Re: Polo*'s Thread: 6n2 1.4 SE PD TDI. **Xenon's**

Posted: Sun Apr 17, 2011 9:43 pm
by Polo*
Cheers fella. Had the Xenons off today and took them to pieces to fit 8 washers total! all info and a great guide here. http://uk-mkivs.net/forums/t/175658.aspx

Result: Xenon Colour Cut-off Mod

Image
Untitled by Evostar*, on Flickr
Image
Xenon Cut Off by Evostar*, on Flickr

Gives the nice flickering purple/blue/white effect as seen on newer audi, bmws etc.

Original: Yellow/Olive Colour Band

Image
Yellow Cut Off by Evostar*, on Flickr
*This photo is not mine. but it is exactly what the standard cut off looked like on the polo! forgot to take a before...

Modded: Purple/Blue Colour Band

Image
Projector Colour Band Cut Off Modification by Evostar*, on Flickr

Re: Polo*'s Thread: 6n2 1.4 SE PD TDI. **Xenon's**

Posted: Sun Apr 17, 2011 9:50 pm
by cornishdrummer
6N2 GTI 00 wrote:The HID fogs look aweosme!

Nice update mate 8)
Agree.


What headlights are they ? they look black ish.

Re: Polo*'s Thread: 6n2 1.4 SE PD TDI. **Xenon's**

Posted: Sun Apr 17, 2011 9:58 pm
by Polo*
Standard gti xenons mate. That just a reflection from the trees overhead I think

Re: Polo*'s Thread: 6n2 1.4 SE PD TDI. **Xenon's**

Posted: Sun Apr 17, 2011 10:08 pm
by cornishdrummer
Polo* wrote:Standard gti xenons mate. That just a reflection from the trees overhead I think
oh right, they look good. It looked like they had a lush shiny black finish. :roll: