UK-POLOS.NET - THE VW Polo Forum

Update :

Coilovers and stance on

Jom coilovers, shorter Vmaxx droplinks, new Lemforder top mount bearings, 20mm hubcentric spacers and bolts





Wound all the way down at the front with helper springs in, and all the way down at the back with adjuster cups in

At the Stancism Show
Please note the grill is on permanently now, but came off when we got to the show
Got a #STANCISM'13 sticker made up last minute for the show! Now also removed

Bad news :

CV Boot has split, so thats being done next week.
Anyone got any advice when doing it?

Also, a wheel has flaked, getting sprayed on Monday

Sad times

Guys get at me on instagram @tonyedwards92, just full of pics of my booster

Tony Boi 92 wrote:Bad news :

CV Boot has split, so thats being done next week.
Anyone got any advice when doing it?

Also, a wheel has flaked, getting sprayed on Monday

Sad times

Guys get at me on instagram @tonyedwards92, just full of pics of my booster

Get a new hub nut and torque it up to the right amount, and don't be shy with the CV grease, get it all in there

Dom_ wrote:

Tony Boi 92 wrote:Bad news :

CV Boot has split, so thats being done next week.
Anyone got any advice when doing it?

Also, a wheel has flaked, getting sprayed on Monday

Sad times

Guys get at me on instagram @tonyedwards92, just full of pics of my booster

Get a new hub nut and torque it up to the right amount, and don't be shy with the CV grease, get it all in there

Thanks for that buddy, what hub nut do i need?

Moar pics ;

How static she is



My wheel flake



My mechanics website once he gets it up and running



Stancism sticker on back



Moar pics of lowwwss









Got bored and stripped out back seats and removed sub and amp





Next to do ;

CV joint fitting poss tomorrow
Get alloy resprayed
Custom zaust made up

Alloy STILL not sprayed
CV Joint STILL not fitted
Zaust should be couple weeks
2.5" pipe throughout with decat and 2 silencers

All gone t**s up
Need oil change, gearbox oil change, and oil filter change too

Seats and sub back in, wanted bass again

Tony Boi 92 wrote:Alloy STILL not sprayed
CV Joint STILL not fitted
Zaust should be couple weeks
2.5" pipe throughout with decat and 2 silencers

All gone **** up
Need oil change, gearbox oil change, and oil filter change too

Seats and sub back in, wanted bass again

Update :

CV joint will be this week
Alloy will be this week

Exhaust is done and on : 2.5" decat with one silencer, sounds the beans


EML light is on, so new map in next few months

Oil change and filter done, need to do gearbox oil still though

Seats and sub are out again though and will be staying out!

Right we got some progress ;

CV joint is done, finally !
Gearbox oil change is done
Got my splitter off a Cupra finally fitted, after buying from Ryan

Pics to follow soon ....

Update : Got my lambda sleeve on; and fitted a bung in its place on the pipe.
Ggot rid of the EML light until I get my re-map
Happy times

Fitted new spark plugs, pi** easy job

Tony Boi 92 wrote:Update : Got my lambda sleeve on; and fitted a bung in its place on the pipe.
Ggot rid of the EML light until I get my re-map
Happy times

Fitted new spark plugs, pi** easy job

Spark plugs alright? What did the old ones look like?

andyc315 wrote:

Tony Boi 92 wrote:Update : Got my lambda sleeve on; and fitted a bung in its place on the pipe.
Ggot rid of the EML light until I get my re-map
Happy times

Fitted new spark plugs, pi** easy job

Spark plugs alright? What did the old ones look like?

Yeah mate gapped them proper too
They werent in too bad condition tbh. But for the money they are, its a no brainer ...

.

.

On way back from rolling road.
First time rolled since Ive had her
212.9 bhp with 255 ftlbs of torque
So happy for a Stage 1

Alloy was touched up with a little brush off eBay, well happy how it came out.
Carpeted the exposed bit of metal in the rear so whole stripped out back in now carpeted.
Put in a cargo net covering the rear
Yellow/Orange bulbs as I had yellow film but white bulbs :/
Added a Prept sticker

Got my tax letter through today £260 :/

good figures tony lad

but you do have a turbo back exhaust and fmic which are stage 2 mods