Page 5 of 11
Re: My Polo - The Project..
Posted: Mon Jan 09, 2012 3:03 am
by Tech-Ho
Quick update..
My second valver bumper has been plastic welded and sanded. ready for its first skim of fibre glass
Plastic welded using the soldering iron method, takes time but its a good result for a first ever attempt. Rear is plastic welded and re-enforced with aluminium mesh that has been melted into the plastic along the whole length of every seem. Fibre glass will be added to reenforce the rear too.. as the bumper stands..
Ive gotten a badged grill also, so shall be trying the original grill back to see what it looks like.
And i have managed to buy something special.. Full 6n2 interior convertion
should be doing it next weekend so shall get pics then
updates as they come
Re: My Polo - The Project..
Posted: Fri Jan 13, 2012 2:12 am
by Tech-Ho
Quick update..
So.. This Happened
All in order to change a Heater matrix.. takes the p***, money i was going to use to get new interior bits
Sad times..
My Polo - The Project..
Posted: Fri Jan 13, 2012 1:25 pm
by benmkiv
Leave it stripped ready for new interior
Re: My Polo - The Project..
Posted: Sat Jan 14, 2012 2:01 am
by Tech-Ho
Soo umm...
BOOOO YAAAAA!!!
hehe
little interior update.. 6n2 dashboard convertion. I have doorcards to go in aswell and will be getting these done in the next week or so
Only needs a new glovebox - handles broken off and a second cup holder
Full convertion.. £100.. WINNING!
More updates as they come..
My Polo - The Project..
Posted: Sat Jan 14, 2012 1:23 pm
by red6n2
Any plans for a 6n2 rear bumper ?. I think that would finish it off very nicely.
Re: My Polo - The Project..
Posted: Sat Jan 14, 2012 6:01 pm
by Tech-Ho
red6n2 wrote:Any plans for a 6n2 rear bumper ?. I think that would finish it off very nicely.
yes mate
thats all im telling you
full 6n2 rear end when i can afford to getthe bumper
Re: My Polo - The Project..
Posted: Mon Jan 16, 2012 2:06 am
by Tech-Ho
Re: My Polo - The Project..
Posted: Mon Jan 16, 2012 2:06 am
by Tech-Ho
Re: My Polo - The Project..
Posted: Sat Jan 21, 2012 5:06 pm
by Tech-Ho
Insurance renewal time.. £1800
Bye bye rota funddd
Because of this C U Next Tuesday of a setback, ill be focusing on the tiny little touches that will probably get forgotten or overlooked when buying big things.. so little interior touches etc..
Progress will be slow for a while now
On the bright side, 6n2 Doorcards are now in - the convertion is now complete
Updates soon..
Re: My Polo - The Project..
Posted: Sun Jan 29, 2012 10:52 am
by racerjonzo
bar the heater matrix, does dash just plug back into original plugs etc? or does loom need modding?
was the heater matrix that bad a swap?
possibly doing this to mine so thought id ask, appreciate any help
Re: My Polo - The Project..
Posted: Sun Jan 29, 2012 2:08 pm
by Tech-Ho
racerjonzo wrote:bar the heater matrix, does dash just plug back into original plugs etc? or does loom need modding?
was the heater matrix that bad a swap?
possibly doing this to mine so thought id ask, appreciate any help
Dashboard itself is a straight swap. Only thing you have to do is hit/beat/cut out the two mounts that the side of the dashboard fixes into (where you have to open doors to access). These will need to be replaced with 6n2 ones..
Heater matrix is directly swappable between the 6n & 6n2 heater housing - you WILL need ALL the heater components from a 6n2 - housing, blower, directional tubing etc..
The looms have to be modified from 6n2 to 6n - i did NOT do this myself so i cannot take any credit or give any help with this..
Aaron
Re: My Polo - The Project..
Posted: Sun Jan 29, 2012 2:13 pm
by racerjonzo
Cheers man for what u can help with
Re: My Polo - The Project..
Posted: Thu Feb 09, 2012 12:40 am
by Tech-Ho
Re: My Polo - The Project..
Posted: Thu Feb 16, 2012 10:47 pm
by Tech-Ho
Bit of an update since the bump..
Car is going in for work.. i say work, the thing is getting dismantled. Boot, bonnet, doors and bumpers are comming off. Along with the windows..
She's having some fresh paint all over.. the last job was in a nutshell: a 'p*** take' of a job. So its getting rubbed back and starting all over from scratch. Properly this time.
Also, Ive bought some New wheels
Updates soon..
Re: My Polo - The Project..
Posted: Sat Feb 18, 2012 1:36 pm
by gradley
nice