UK-POLOS.NET - THE VW Polo Forum

I doubt you can get that amount of power with just a remap, without any other mods...

it's do-able, seen ibiza's enough with that output on stock engine (wich is the same as Polo)
but it's not that safe, it's a risk to drive around when the turbo is on that much boost with only remap...
if you get it to 210Hp youre allready driving on the limit with only remap, it's a bit safer.

Take delivery of my polo on tuesday. A local workshop near me deals with superchips http://www.superchips.co.uk/index.php?o ... Itemid=134

What do people think?

Also just got a quote from Drivers Glasgow they quoted me £349+ VAT For a REVO map and that takes it to 207 brake. are these Figures correct!? i thought you needed stage 2 + Exhaust and FMIC for them gains.
http://www.drivers-glasgow.co.uk/REVO_m ... _prod.html

i payed £300 cash for my revo staged one.. with just stage one your be looking at about 195 bhp!

Ahh i got quoted £400.
is a revo map quite aggresive or is it smoooth?
Ive been offerd a few custom maps of people doing it on the side but i guess its maybe best to stay out the way of them.

i belive its bit more aggresive! i got quoted £350 but i offered em £300 cash and they were fine with it!

GuyGTi wrote:Also just got a quote from Drivers Glasgow they quoted me £349+ VAT For a REVO map and that takes it to 207 brake. are these Figures correct!? i thought you needed stage 2 + Exhaust and FMIC for them gains.
http://www.drivers-glasgow.co.uk/REVO_m ... _prod.html

For stage one 207 seems OTT, depending on what mads you have? Standard on stage one is about 195bhp, then stage two with mods you need see's around 220 to 230 bhp. I am running stage 2 Custom Code the now with no problems at all. Dealers are located just over the Erskine Bridge depending on where you are coming from? Cant fault them at all!

Drivers fitted my Milltek too, very good service in there also!

Ahhh so where did you get your Map done sorry? Custom codes?
Yea i did think 207 was ambitious.

Yeah, go on to the custom code website, cant remember the name of the dealer. TBH i dont think there is much between all the stage one maps so really up to you? APR have a dealer in Kirkcaldy too.

id say revo all day long. there probly isnt much in it but they are a big outfit and have the resources to do some serious r&d. Mind you the only reason id recommend em is cos they gave me 225bhp on a stage 1 with panel filter, v-power helps alot. finally got round to finding my picture of my print out. this was clocked a few weeks after the software was added to the car (at gti international)::::



i was chuffed to bits. it pulled 215bhp and then 220bhp on the two warm up runs then pulled 225 twice peaking at 225.8

Nice numbers
I've got 239 hp with Revo stage2, with BMC CDA, Forge FMIC and only downpipe with stock catback, and then 363 hp with Revo stage3

What internals have you upgraded for stage 3 vlad?

Stock internals, they are good for powers ~ 350 hp. The torque is exactly the same as it was with the stage2 and k03 turbo, so there should be no problems for now, as I'm only running with 1.3 bar.

Oh, thought you upgraded your internals. What torque you got?