Page 6 of 16

Re: My crazy polo (New updates with pics)

Posted: Tue Jun 19, 2012 12:13 pm
by Jemima
just a little update :)
Image

think i have room to go lower :p just waiting for some better weather :/

Re: My crazy polo (New updates with pics)

Posted: Mon Jun 25, 2012 12:01 pm
by Jemima
wound the coilies right down this weekend :) even managed to take the wheel off and put it back on all by myself :) infact i did all of it bar the tightening of the bolts and couldnt put one wheel back on cos i was tired by then so very proud of myself :)

before
Image

after
Image

Re: My crazy polo (New updates with pics)

Posted: Tue Jul 03, 2012 12:08 pm
by Jemima
Look what i got for my birthday from my boyfriend :D
20mm bolt on hubcentric spacers and a k&n air filter :p will be fitting them this week
Image

Re: Polo 9n3 project (updated)

Posted: Tue Jul 03, 2012 8:16 pm
by Jemima
a few pics i took this weekend :)
Image
Image
Image

Re: Polo 9n3 project (updated with spacers)

Posted: Wed Jul 04, 2012 7:55 pm
by Jemima
Well the boyfriend kindly offered to fit my 20mm spacers for me tonight so here's some before and after shots :D
very happy with it

Before:
Image
Image

After:
Image
Image
Image

:D

Re: Polo 9n3 project (updated with spacers)

Posted: Wed Jul 04, 2012 10:35 pm
by morells
the car looks great i loved the different colour wheels at the start but still think the current colour suits it more. One question with the spacers are they just on the rear or do you have some on the front aswell? Oh and is that a white cupra in the picture or a normal ibiza either way they all look good :)

Re: Polo 9n3 project (updated with spacers)

Posted: Thu Jul 05, 2012 9:37 am
by Jemima
Spacers are just on rear, thinking of getting some 10mm on the front but i like how the back sits out further than the front :) and it's an ibiza behind my car :)
I either need to get the arches flared or raise the back suspension a little bit cos i'm catching the arch over every little bump :/

Re: Polo 9n3 project (updated with spacers)

Posted: Tue Jul 10, 2012 1:06 pm
by TehSniper
This deffo looks amazing! very temped by the spacers once i get a bit lower haha

Re: Polo 9n3 project (updated with spacers)

Posted: Wed Jul 11, 2012 11:52 am
by Jemima
Wind deflectors turned up so i fitted them last night :)
Image

Re: Polo 9n3 project (updated with spacers)

Posted: Tue Jul 17, 2012 11:34 am
by TehSniper
Where abouts did you get your deflectors from?

Re: Polo 9n3 project (updated with spacers)

Posted: Thu Jul 19, 2012 12:03 pm
by Jemima
on ebay they were only bout 35 quid for a 5 door :)

Re: Polo 9n3 project (updated with spacers)

Posted: Tue Jul 24, 2012 1:27 am
by TehSniper
Im guessing the 3 door 9N ones will fit my Gti as im only 3 door?

Re: Polo 9n3 project (updated with spacers)

Posted: Thu Jul 26, 2012 12:04 pm
by Jemima
can't see why not but dont take my word for it. mine is 5 door so wouldnt want to advise incorrectly

Re: Polo 9n3 project (updated with spacers)

Posted: Fri Jul 27, 2012 9:30 am
by Jemima
Gloss black vinyl roof wrap getting done next weekend, not getting arches flared, going to get some stretch instead :)

Re: Polo 9n3 project (updated with spacers)

Posted: Fri Jul 27, 2012 11:18 am
by tt509
looking good