Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Wed Jan 12, 2022 3:55 pm
by ag69
very nice iichel.
With all these mods, I am short of superlatives to express you!!!
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Wed Jan 12, 2022 6:59 pm
by giannis20vt
Wow, excellent job. I admire your will to create.
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Wed Jan 12, 2022 7:29 pm
by ciclo
Great!
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Wed Jan 12, 2022 8:47 pm
by iichel
Thank you all. The show goes on
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Fri Jan 14, 2022 1:56 pm
by 6cgti_bcn
Great retrofit! You are doing a very good job!
I think I will miss my old Scirocco's gauges to check oil temp easier!
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Fri Jan 14, 2022 3:42 pm
by iichel
Normally, I always have the digital speedo in my cluster. The oil temperature is only 1 click down, if you need it.
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Fri Jan 14, 2022 3:46 pm
by amer6R
Are you still running a dpf pressure sensor ?
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Fri Jan 14, 2022 3:54 pm
by iichel
Yes, I have an intact DPF on my car.
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Fri Jan 14, 2022 3:59 pm
by amer6R
Yes, I saw the pictures you posted. You've relocated it. I think its a really nice upgrade.
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Fri Jan 14, 2022 4:16 pm
by iichel
amer6R wrote: Fri Jan 14, 2022 3:59 pm
Yes, I saw the pictures you posted. You've relocated it. I think its a really nice upgrade.
You mean the DPF differential pressure sensor? It's still on the original location, a bracket on the fuel filter.
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Fri Jan 14, 2022 5:31 pm
by amer6R
No, i meant on the sensor lines that go to the dpf. I presume you routed them on top side. Since its not visible on photo. That why i thought you maybe turned that feature off.
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Fri Jan 14, 2022 5:39 pm
by iichel
Ah yes, now I understand. The DPF is completely intact and working as intended. All sensors present.
----
How I got by the issue of the D/S indicator in the lever head not being illuminated.
to illuminate the D/S in S mode. the dsg selector mechanism has some kind of error detection on the LED.
if I connect both one or wires to the D/S LED (T10/6) it will go out after a few seconds. I don't think there is a DSG bit/byte to disable light diagnostics on the dsg lever
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
Posted: Mon Jan 17, 2022 1:43 am
by patil
iichel wrote: Fri Jan 14, 2022 5:39 pm
How I got by the issue of the D/S indicator in the lever head not being illuminated.
to illuminate the D/S in S mode. the dsg selector mechanism has some kind of error detection on the LED.
if I connect both one or wires to the D/S LED (T10/6) it will go out after a few seconds. I don't think there is a DSG bit/byte to disable light diagnostics on the dsg lever
iichel, thanks a lot for sharing both the problem and solution associated with new led dsg lever on 6R. Even I have ordered same lever, yet to reach me (RUS--IND). I intend to install new lever with 6C base( more lights ).
I see you are using a 12v 1ch relay with optocoupler isolated board that allows an electrical signal to be transmitted between two isolated circuits(for D&S) sharing single SMD, am I right? I am curious to know how it works.
Re: iichels Polo 6R 1.6TDI DSG --> OEM++ R-Line conversion
... 
