UK-POLOS.NET - THE VW Polo Forum

Allright guys, so around 3 weeks of having Wavetrac lsd. It is totally different, you can put the power down anytime, anywhere, unless it is damp, but that is normal and no lsd would hold this I'm happy with the mod, will see how it handles on track this season.

I also add this link to a video I just made of my full turbo-back exhaust: https://youtu.be/q2eg7wJIjZs

Scotty_boy vw wrote: Sun Dec 22, 2019 4:26 pm My latest mods
Lane Assist/Traffic Sign Assist/High Beam Assist & Highline Tyre Pressure System

What parts did you use to make lane assist,traffic sign assist, and high beam assist? I would love to add this...

peter007 wrote: Fri Jan 03, 2020 2:32 pm It is totally different, you cant put the power down anytime, anywhere, unless it is damp, but that is normal and no lsd would hold this

I presume you mean it can put the power down anytime

l3rady wrote:

peter007 wrote: Fri Jan 03, 2020 2:32 pm It is totally different, you cant put the power down anytime, anywhere, unless it is damp, but that is normal and no lsd would hold this

I presume you mean it can put the power down anytime

Of course, my mistake


Wysłane z iPhone za pomocą Tapatalk

Last month someone broke my rear window,as my glasses were not dark I asked to put a dark one. Now I will change the missing ones, I am waiting for the small triangular glasses I already bought the glue and then I will change the ones for the doors.

The first step I´m waiting for the door glasses.

Finally its done.

J+silva wrote: Thu Apr 16, 2020 9:31 pm Finally its done.

Congratulations on the change.
For me at least tinted rear windows in a car is a "must have"...

J+silva wrote: Thu Apr 16, 2020 9:31 pm Finally its done.

Next job, re-align your rear bumper, both sides could do with adjusting to line up with the quarter panels.

That bumper was a job made in the dealer I order a change in the bumper to put a fake exhaust, initially it didn't look out of line but now i have to give it an adjustment, good eagle eye polo clive

Now I think that its better.

J+silva wrote: Fri Apr 17, 2020 4:55 pm Now I think that its better.

Yes that's much better J, good job.

I've actually noticed quite a lot with mis-aligned bumpers (front and back), I've also had to adjust mine slightly

Is it fairly easy to do, is it in via the wheel well?

cheers

MJ

mjsaville wrote: Fri Apr 17, 2020 9:39 pm Is it fairly easy to do, is it in via the wheel well?

Yes, just remove the 3 or 4 torx screws from the arch liner to gain access, then loosen the one holding the bumper to the wing/quarter panel, align the bumper and tighten the screw back up.

You can see in the picture the cover already loose.