tyres pressure
Posted: Sat Mar 26, 2005 4:38 pm
Would you mind to tell me the tyres pressure for Polo GTI with original
15" BBS
15" BBS
UK-POLOS.NET - THE VW Polo Forum
Probably the Worlds greatest Polo resource
https://uk-polos.net/
tyres pressure
Page 1 of 1
Posted: Sat Mar 26, 2005 4:40 pm
I checked with my local VW dealership who told me that fronts should be 2.1bar, and rears 2.3bar. I usually run about 2.1 all round mind you and its fine
Posted: Sun Mar 27, 2005 12:51 am
As it's FF car, why rear pressure higher than front?? 
Posted: Sun Mar 27, 2005 3:57 am
Inside the petrol cap on my car it says
2.4 bar front and 2.2 bar rear.
that's 35 psi front and 32 psi rear
thats what I keep mine at and tyre wear is fine
I think the fronts should be higher because of the weight of the engine.
The most important thing is that the pressures are even on both sides of the car.
2.4 bar front and 2.2 bar rear.
that's 35 psi front and 32 psi rear
thats what I keep mine at and tyre wear is fine
I think the fronts should be higher because of the weight of the engine.
The most important thing is that the pressures are even on both sides of the car.
Posted: Sun Mar 27, 2005 12:03 pm
What size are the standard tyres? 195/45 R15? I have 25 back and 27 front, but I thought it might need more.
It should usually be higher at the front as they do almost all the work as well, but it all depends if you want understeer or oversteer. Put more in the back for oversteer, or more in the front for oversteer.
Oversteer usually safest, but its a matter of preference, it just depends wether you want to see the tree that kills you or not.
It should usually be higher at the front as they do almost all the work as well, but it all depends if you want understeer or oversteer. Put more in the back for oversteer, or more in the front for oversteer.
Oversteer usually safest, but its a matter of preference, it just depends wether you want to see the tree that kills you or not.
Posted: Sun Mar 27, 2005 2:50 pm
Yes, I just find out the label inside the petrol cap, but why have to pumpmikegti wrote:Inside the petrol cap on my car it says
2.4 bar front and 2.2 bar rear.
that's 35 psi front and 32 psi rear
35psi, it's so high pressure for a 1090KG car
As I know , many 1000-1100KG cars only need 30psi............
Posted: Sun Mar 27, 2005 11:47 pm
I'm going to try 32psi on my fronts, see if it helps reduce understeer when its damp
Posted: Mon Mar 28, 2005 6:09 am
But one thing is true, 35psi must save little fuel 
Now, my place need GBP $1 per L.............
Now, my place need GBP $1 per L.............
Posted: Mon Mar 28, 2005 1:08 pm
Right - I put 35 in front and 32 in the back as stated, and its too hard. So I'm going for 32 in front and 30 in back now. 195/45/15 .
It drove ok, but it was clearly too hard, would be fine for motorway but too hard for normal usage, I like my car to be peaceful and not bounce over the pot holes that my council have left for me.
I have new alloys and tyres now. They look very very nice in my opinion. Will post pics, when I get around to it....
It drove ok, but it was clearly too hard, would be fine for motorway but too hard for normal usage, I like my car to be peaceful and not bounce over the pot holes that my council have left for me.
I have new alloys and tyres now. They look very very nice in my opinion. Will post pics, when I get around to it....