Page 1 of 1
Oil coolers...
Posted: Mon Mar 28, 2005 6:59 pm
by gtjoe
Right, i'm thinkin of buyin an oil cooler off me m8, with a polo adapter (off of his mk2 golf race car), has ne one else on here fitted them to their gt??? I know how to fit it, it's jst sometimes, on some cars the engines are designed 2 run with hot oil if ya know wot i mean, so i was worried if this was the case on the gt?
Posted: Mon Mar 28, 2005 7:08 pm
by hardhitter
Oil coolers are a good idea on a GT. Just make sure the adapter plate is thermostatic one (opens and closes at the right temp) and you will be fine. If it's off a race car its not likely to be a thermo plate, but they are cheap enough to buy. What size / rows does it have ?
Posted: Mon Mar 28, 2005 7:38 pm
by gtjoe
i'm not too sure m8. I'm pickin it up 2moz nite, buyin it for 100 notes.
Posted: Mon Mar 28, 2005 8:38 pm
by hardhitter
Not very cheap, you can buy a brand new mocal 10 row 235mm width oil cooler, stat plate and pipes brand new for about that.
Posted: Mon Mar 28, 2005 10:31 pm
by hayesey
I'd buy a new one for that money.
if you dont want to buy a new thermo plate you can get in-line oil stats for about 30 notes.
Posted: Tue Mar 29, 2005 10:47 pm
by gtjoe
13 row it is:
Posted: Wed Mar 30, 2005 12:34 pm
by gofasterpinch
just need a sandwich plate now then
Posted: Wed Mar 30, 2005 7:38 pm
by gtjoe
yeh i got all that wit it m8.