My old 8v
Posted: Tue Jun 14, 2005 8:59 pm
Just thought I would post some pics of my old 8v, just cause I love it so much, wish I hadn't sold it !
Looks really nice. You shouldn't have sold it.
What have you got now?
UK-POLOS.NET - THE VW Polo Forum
Probably the Worlds greatest Polo resource
https://uk-polos.net/
My old 8v
Page 1 of 1
I like it!
Posted: Tue Jun 14, 2005 9:33 pm
Posted: Tue Jun 14, 2005 9:36 pm
looks smart. wat was it lowered by??
Exhaust
Posted: Tue Jun 14, 2005 9:36 pm
What exhaust have you got on there, if you don't mind me asking?
I want one that shape but only a rear box, and i dont want it DMT. Complete system seems too expencive. How much did that one cost?
I want one that shape but only a rear box, and i dont want it DMT. Complete system seems too expencive. How much did that one cost?
Posted: Tue Jun 14, 2005 10:14 pm
bllomfield_5 hes got it for sale mate! check for sale section 
Posted: Wed Jun 15, 2005 12:01 am
I've got my Mk4 Polo smoooooothed at the rear too and was thinking of putting a 'POLO' badge on the back. Or even spaced out 'P-O-L-O' like on the new MG's 
Posted: Wed Jun 15, 2005 9:40 pm
Nice car mate, just wondering how you cut the space out the bottom bit of the back bumper to fit the tail pipe in ?
I know its metal and ive tried bending mine up and adding spacers on the bolts so it hangs lower but im still gettin some rattle at high revs !
Ive got a double tail pipe which is fairly large and i just want it to look more at home by blnding it in with the bumper !
I know its metal and ive tried bending mine up and adding spacers on the bolts so it hangs lower but im still gettin some rattle at high revs !
Ive got a double tail pipe which is fairly large and i just want it to look more at home by blnding it in with the bumper !
Posted: Wed Jun 15, 2005 11:10 pm
how much is that car lowered by?
Posted: Thu Jun 16, 2005 12:22 am
from another post...1litreheater wrote:Nice car mate, just wondering how you cut the space out the bottom bit of the back bumper to fit the tail pipe in ?
Well guys, any other ideasTom_G_SGF wrote:I used an air tool to cut the bumper, but you prob don't have one of those, I would advise some sort of small hack saw or something (i'm sure the guys on here would have some good ideas !)
I'm going to need to do mine soon, but my bumpers are 1 piece not 2, so plastic I think.
Posted: Thu Jun 16, 2005 11:27 am
what splitter was on that car,
Posted: Thu Jun 16, 2005 1:27 pm
don't know what it is off, i got it at gti international and made it fit, I think it was meant for an 8 valve bumper as the part number was for a 6n !
not very helpful, sorry !
not very helpful, sorry !
Posted: Thu Jun 16, 2005 3:24 pm
I'm going to need to do mine soon, but my bumpers are 1 piece not 2, so plastic I think.[/quote]
well if its plastic use a hack saw, or even better a jig saw, i have seen it done with a jig saw follow theese instructions
1. mask out the wholle area with strong tape, duck or strong mask (so the material does not scrach, crack or chip)
2. draw on the shape you want (perminant marker on top of mask)
3. make sure you cut within the lines (cuz you can allways sand more away)
4. sand using different grades of wet and dry.
5. primer and paint the edges to avoid paint peeling (or add a heat shield, i have seen some no rice ones)
6. refit the bumper
by the way i accept no responsability for what happens as i saw it done on the rear valance of a focus and it may not work on yours!
well if its plastic use a hack saw, or even better a jig saw, i have seen it done with a jig saw follow theese instructions
1. mask out the wholle area with strong tape, duck or strong mask (so the material does not scrach, crack or chip)
2. draw on the shape you want (perminant marker on top of mask)
3. make sure you cut within the lines (cuz you can allways sand more away)
4. sand using different grades of wet and dry.
5. primer and paint the edges to avoid paint peeling (or add a heat shield, i have seen some no rice ones)
6. refit the bumper
by the way i accept no responsability for what happens as i saw it done on the rear valance of a focus and it may not work on yours!