UK-POLOS.NET - THE VW Polo Forum

Posted: **Wed Jul 13, 2005 4:21 pm**

I'm trying to install the MK4 Votex kit in my 9n MK6 polo and would like to know where the CPump resides.

Thanks!

Mike

Posted: **Wed Jul 13, 2005 5:51 pm**

Non-existance as we discovered m8

Posted: **Wed Jul 13, 2005 8:03 pm**

The 9n is a Cabus wiring system, so uses a Convienience Control Unit rather than a Central Locking Pump. So a MK4 Remote locking kit won't work

(first post on here in ages!)

Posted: **Wed Jul 13, 2005 9:35 pm**

Hi Nelson, thanks for the info

Would you happen to know the exact location of the CCM in a Polo Mk5?

diagram is too vague?

thanks,

Posted: **Thu Jul 14, 2005 4:15 am**

Nelson_Wilbury wrote:The 9n is a Cabus wiring system, so uses a Convienience Control Unit rather than a Central Locking Pump. So a MK4 Remote locking kit won't work

(first post on here in ages!)

Thanks for that bit of info dude...where *is* the CCM even located and what are my options for installing some kind of keyless entry etc?

Posted: **Fri Jul 15, 2005 12:10 pm**

Hi bsodmike, is this something your after;

Votex Shop

(Hi to the board also)

Posted: **Fri Jul 15, 2005 3:13 pm**

Hi!

That's interesting, says:

VW Polo (A04) 2002 ->2005

also a different part number to mine... could work... but if it runs of the ECU, where would you plug it?! In-line with the CCM?

Posted: **Fri Jul 15, 2005 5:11 pm**

If i was to buy one of those, do you reckon the instructions would be in german only?

Posted: **Fri Jul 15, 2005 8:48 pm**

Most likely in English too, not that important, can always translate

Posted: **Sat Jul 16, 2005 9:09 am**

Ooh nice find guys

Of course my german sucks and I have contacted VAG and asked them to comment on this.

UK-POLOS.NET - THE VW Polo Forum

Central Locking Pump - Location!

Central Locking Pump - Location!