Page 1 of 1
how do i fit DTM mirrors?
Posted: Wed Aug 31, 2005 10:23 am
by chris_lofty
as above, just bought a set of DTM mirrors off a guy on ebay, wondering how i can fit them to my mk3 polo coupe...
standard mirrors are naff!
lofty
Posted: Wed Aug 31, 2005 12:12 pm
by SpikeyG40
depends if they are mk3 polo or mk2 golf (?) specific!
if they are universal fitment then you'll need a base plate and i no that halfords don't do them! so you may need to buy a universal plate an make it fit!
however, if its the mirrors i think it is, which are polo specific, i think they will either screw on, or they may need to be stuck on with some sort of adheisive!
hope that helps you out!
regards
Doug
Posted: Wed Aug 31, 2005 4:21 pm
by mk2keel
Did you get a baseplate with the mirrors or not?
I bought a mk3 baseplate with mirrors to fit my mk2 and tbh the baseplate was a s**t fit to both the mirror and the car.
You can use foamboard type stuff as a baseplate by cutting it to size and then drilling through it and screwing it all together.
Posted: Wed Aug 31, 2005 4:21 pm
by mk2keel
Did you get a baseplate with the mirrors or not?
I bought a mk3 baseplate with mirrors to fit my mk2 and tbh the baseplate was a bad fit to both the mirror and the car.
You can use foamboard type stuff as a baseplate by cutting it to size and then drilling through it and screwing it all together.