UK-POLOS.NET - THE VW Polo Forum

ok everytime i do some thing to the g i come on here n tell u people wat i done n it turns out i done it all wrong or done some thing crappy

so im gona say it before it happends


i ordered koni sports suspension n springs ( i just done it again didnt i ? all worng?)

n i been told by the guy in the shop that they r a apin in the arse to fix, i was also told i might as well get a powerflex 6 peice kit as my bushes r foooooked n a track rod end, also the top mounts as they are destroyed. whicle the car is all apart in that area i might as well change the front wheel bearings

is there some thing i should no before i go through with it like, a certian way u have to do some thing or the car will blow up?? u know wat i mean like get the wheels tracked or maybe use different rims apart from standard ones to improce handling?

seems fine what you have planned. just be aware that if you have the correct original track control arms, 2 of the powerflex bushes won't fit. the original inner ones are metal rose jointed. you could order new tca's from VAG and only buy the anti-roll bar bushes or use the power flex outer on yours if they are ok.

koni is a good choice btw

See you didn't do anything wrong this time chris hahaha.

Not all of us slate people for being different.

ok ok im taking in wat ur saying.....

but i need spoon feeding cos im useless

new tca's - so i go to a vag dealer n ask what for exactly?


TRACK CONTROL ARMS for a polo GT????? is that the same thing as a track rod end?