Page 1 of 1
can i make this key work with my polo gti?
Posted: Thu Oct 13, 2005 11:18 pm
by nickpolo
hi guys,
if i buy this key is it the right frequency etc to work on my polo gti?
ta
http://cgi.ebay.co.uk/VW-Transponder-Ke ... dZViewItem
Posted: Thu Oct 13, 2005 11:36 pm
by tom_mk5
Nope. Polo uses different central locking system to Golf.
Posted: Fri Oct 14, 2005 12:07 am
by hot_polo
i think it is possible to make it work have a look in the diy section you might find this usefull too
http://www.lowdub.com/switchbladekey.pdf
Posted: Fri Oct 14, 2005 10:16 am
by tom_mk5
That's for the switchblade. He's on about the remote central locking?
Posted: Fri Oct 14, 2005 4:12 pm
by forbezGti
can you not change the chips to make it work??
Posted: Sun Oct 16, 2005 12:24 am
by inder
You could put in your immobliser chip and that should do the trick once the key is cut to start car.
I think the freq is the same, im sure the Polo 6N2/GTi uses 433.92mhz, also you would obviously need remote central locking already present
Anyway, too late now