Page 1 of 1
need help, will these fit??
Posted: Thu Nov 17, 2005 12:35 pm
by mitty
7J 16" et45 4x100 one piece 195/45/16 tyres. ok this is the spec of the wheels.will they fit a 1997 6n 1.4cl polo?? the alloys are from team dynamics. plzzzzz cud some1 help me. will they fit with no arch work/rolling,cutting??
Posted: Thu Nov 17, 2005 12:50 pm
by david burton
Ideally you want 40 profiles on them. but the offset is high so you may get away with it - those rears should fit inside the arches rather than rub - not too sure about your fronts.
is your car lowered much? if it's not lowered they should fit - if it is then the fronts may rub a little.
it's a 50:50 IMO
16"
Posted: Tue Nov 22, 2005 8:31 pm
by Polo Diesel
should be cool i see a polo with 17" with a 35mm drop so i guess as long as the drop ant to bad should be okay man
Posted: Tue Nov 22, 2005 9:15 pm
by 16vTej
that offset may give u probs...with the wheels hitting the shocks
might need some spacers