Page 1 of 2
Side Repeaters
Posted: Sat Nov 19, 2005 1:29 pm
by ModifiedMadness
Also posted in MKV
I'm going to get some new side repeaters, but I'm not too sure how the old ones come off, I don't want to break them (which I would no doubt if I tried) Is there a technique to it?
Cheers
Posted: Sat Nov 19, 2005 3:20 pm
by Si_GTi
You could have just bumped your
old post
But if anyone can provide advice on getting the little buggers out without breaking them, I'd be interested! Got a pair to put on myself, I just haven't gotten off my lazy arse and done it yet - it's cooold!

Posted: Sat Nov 19, 2005 4:35 pm
by ModifiedMadness
I forgot I had that one

Posted: Sat Nov 19, 2005 8:53 pm
by mfa-polo
They're held on one side by a clip, (I think on the right). I would suggest a small screw driver, covered in some electrical tape.
Posted: Sun Nov 20, 2005 9:09 am
by vdubit
if you're worried about breaking them the only real way is to remove the wing liner and unclip from behind. They have a lug on either one side or both (cant remember) that need squeezing inwards.
Posted: Sun Nov 20, 2005 9:50 am
by Reeyad
OK i did this mod on my mk4 polo i simply used a very small screw driver covered in tape and levered it out slowly.
The screw driver i used are the small 1s u use for electrical stuff u knw the small packs u can get different small screw drivers.
It was really easy to do am not 100% if its the same to do on the mk5..........
Posted: Tue Nov 29, 2005 10:08 pm
by ModifiedMadness
Fitted them earlier, took all of about 2 minutes, didn't worry about tape on the screwdriver, didn't need it. They look a lot fresher now

Posted: Tue Nov 29, 2005 10:21 pm
by cyhliu
Yeah, I was going to say I can use my hands on mine, you just need to work out which side is the spring and push towards that side gently but firmly...
Yeah, ModifiedMadness, did you get the crystal ones? Mine were the frosted ones before and the crystals make a difference. Nice!
Posted: Tue Nov 29, 2005 10:25 pm
by ModifiedMadness
Yeah I now have crystal ones
http://www.abcdesignltd.com/ProductImages/B5-302.jpg they look a lot better than the frosted ones yeah.
Posted: Tue Nov 29, 2005 10:26 pm
by Si_GTi
I've got a pair of the fresher crystal ones still to go on

just haven't gotten around to it. Which way do they push to release?
Posted: Tue Nov 29, 2005 10:28 pm
by ModifiedMadness
I prized it out on the side nearest the door, you'll soon find out, just do it gently and it'll pop out easy as anything

Posted: Tue Nov 29, 2005 10:30 pm
by Si_GTi
Cool

I'll try and get it done some time!
Posted: Tue Nov 29, 2005 10:31 pm
by Reeyad
Are these after market or standard as mine has them already the crystal ones that is......
Its an X reg, 1st registerd Dec 2000, but tracing engine code its 2001 model...

Posted: Tue Nov 29, 2005 10:35 pm
by ModifiedMadness
As far as I know the standard ones are more like these ones
http://www.abcdesignltd.com/ProductImages/A3-312.jpg
Posted: Tue Nov 29, 2005 11:08 pm
by cyhliu
Both are standard VW, you can order both from VW but I think the crystal ones came on later models,I thought 2001 onwards...mine is a 2000 and it had the frosted ones...