Help timing belt problem
Posted: Mon Jan 09, 2006 8:47 pm
Rite i found out a few days ago i needed a new water pump took the pump out and relised that my timing belt was rubbing on the casing. so i had a close look and saw that my cam belt tensioner was missing bits.. took that off and replaced that! so i have had a new water pump and new cam belt tensioner all shiny and new, so i thought while its up change the timing belt, i changed that put it all back together started her up.
Then i noticed that the timing belt had sliped bout 5ml off the top pulley? naw when i took the casing off it in the first place it was in the same position? any ideas cause its frying my head? could something be bent or snapped?
has any one else had this problem?
cheers tony100
Then i noticed that the timing belt had sliped bout 5ml off the top pulley? naw when i took the casing off it in the first place it was in the same position? any ideas cause its frying my head? could something be bent or snapped?
has any one else had this problem?
cheers tony100