Page 1 of 1
what size socket for the steering wheel?
Posted: Wed Jan 25, 2006 11:12 pm
by Mk2Adam
i've brought a steering wheel and i need to know what size socket the nut holding the wheel on is...because i know i havn't got it in my set meaning buying an individual socket, i think it was something like 25 or 26 but can anyone confirm for me?
Posted: Thu Jan 26, 2006 12:19 am
by 86C
24mm
Posted: Thu Jan 26, 2006 10:07 pm
by Mk2Adam
Cheers mate, i'll run in and pick up a 24mm socket tomorrow
Posted: Thu Jan 26, 2006 11:38 pm
by omicron
Think I used a 15/16" on mine when I did it last time. Bit slack, but it does the job.
Oh, and pull the wheel loose on the splines before to take the nut off the last couple of turns. It saves you smacking yourself in the boat race with the steering wheel
Posted: Thu Jan 26, 2006 11:42 pm
by Mk2Adam
havn't got one of them either, my set only goes up to 22mm
i'll pick up a 24mm from halfrauds tomorrow during my lunch.
