Page 1 of 1
polo gt
Posted: Mon Feb 13, 2006 8:37 am
by dale pohl
Hi all im new to the forum and to polo's,i have just brought the mrs a gt and im wanting to change the wheels it currently has 15" not to my taste and i want to fit 7*13 ats classics all round with a et20 will these be ok i will also be dropping it around 50-70m on coilovers any advice would be greatly appreciated.dale
gt
Posted: Fri Feb 17, 2006 9:02 pm
by dale pohl
Anyone
Posted: Fri Feb 17, 2006 9:28 pm
by robz
it should be fine dropped 50mm, 70mm might cause some scrubbing tho. HTH
oh & welcome 2 the forum!
Posted: Sat Feb 18, 2006 6:26 pm
by pettsy
i'd say you'll be ok, the only problem being the coilovers. Due to the suspension leg design on mk3 polos you can't just change the shock absorber.The only way to fit coilovers to a mk3 as far as i know is to send your front suspension legs off to germany to be converted by one of the suspension companies.
can anyone confirm this?
Pettsy
Posted: Sun Feb 19, 2006 11:35 am
by robz
not 100% sure on how it works, tho wot Pettsy says sounds about right.