Page 1 of 1
ATS Classics & New Tyres, Help!
Posted: Mon Apr 24, 2006 4:38 pm
by WildChild
I'm looking at buying some new ATS Classics, either 7x13's or 8x13's, at the moment i have 145/70 tyres and they are shocking when it comes to cornering (one of them is the original that came with the car and its still in good nick.. :O)
anyway.. i am planning on buying the ATS Classics start of June, but what should i get the 7x13's or the 8x13's, the 8x13's are about £100 more, which is £100 i'd rather not spend.. but can if the difference is worth it..
Also by the end of July i will have 4 new 175/50 13's on the ATS classics, problem i have is between me getting the new tyres and the new alloys i will be using 145/70s with the ATS Classics, will the 8x13's fit with these or be too wide?
Posted: Mon Apr 24, 2006 9:41 pm
by SteB
I think you'll be best with 7s all round. Is there a choice of offsets ?
For reference purposes, this is and 8" on the front, with ET0
Its an MOT failure as the tread is outside the arch
Posted: Mon Apr 24, 2006 9:49 pm
by WildChild
Is there anyway of working out if mine will be "MOT Failurable"? 13x7 + 175/50?
Posted: Mon Apr 24, 2006 9:51 pm
by SteB
Can probably estimate it if you know the offset
Posted: Thu Apr 27, 2006 12:21 pm
by polog40racer
138& on 175/50/13 should be fine depend on your ET. My girlfriend runs 13*7 ET5 on her RG11 wheels (when they are back form the refurbers) and the tread sticks out the front on her Mk2 by an inch! But at the rear, they sit perfect, just legal. Classics on an ET20 should be fine!
Haven't got any pics of a tyre but you should be able to see.
An earlier one...
Posted: Thu Apr 27, 2006 3:06 pm
by WildChild
so will my car fail its MOT if the wheels tread is outside of the arch?
Also, how i work out the "ET"?
Posted: Thu Apr 27, 2006 4:05 pm
by SteB
Its the difference between the back space and the midline of the wheel
The rule of thumb is, the lower the offset, the more they stick out.
Posted: Thu Apr 27, 2006 5:41 pm
by tupac2makaveli71
erm sorry but one of the grey coupe pics says GIRL racer??? you are a chick....just wondering
Posted: Thu Apr 27, 2006 5:46 pm
by WildChild
polog40racer wrote: My girlfriend runs 13*7 ET5 on her RG11 wheels
Posted: Thu Apr 27, 2006 5:47 pm
by WildChild
SteB wrote:Its the difference between the back space and the midline of the wheel
The rule of thumb is, the lower the offset, the more they stick out.
Sorry Steb, i dont understand that bloody picture at all, which part of my physical wheel do i measure it?
that picture doesnt even vaguely resemble a tyre lol! (well not to me anyway..)
I understand the idea of the offset is between what ever and what ever, but how do i work out whats the biggest tyres i can get for my Polo without them being illegal..!
Posted: Thu Apr 27, 2006 5:49 pm
by Mk2Adam
ja, the grey coupe s (now g40 powered) is his g/f's...his car is a g40 racecar, some pics in mk3 section
