Page 1 of 1
Lowered the back of my car
Posted: Tue May 02, 2006 8:00 pm
by polofresh
Posted: Tue May 02, 2006 9:27 pm
by Mk2Adam
wow, that's looking great, for 60mm that looks really low, gonna look perfect when you do the front, and where are you buying your track rod ends from and how much are you paying? might have the same problem

Posted: Tue May 02, 2006 9:44 pm
by robz
looking really good so far!

Posted: Tue May 02, 2006 9:49 pm
by polofresh
im gonna get the track rod ends from gsf mate hopefully they will give me the right parts this time they seem a bit incompitant at the moment
the rear strut is adjustable in 5 positions so it might be lower but i did tell 60mm all round so i dont no

Posted: Tue May 02, 2006 11:13 pm
by metz
Bye Bye centre box hehehe. looking good mate.
Posted: Wed May 03, 2006 8:29 am
by polofresh
metz wrote:Bye Bye centre box hehehe. looking good mate.
i no its funny
the hanger is screwed ive got a new one to fit this morning so it should be alright
i reversed it of my drive and the centre section scraped on the floor on a half inch lip of curb

Posted: Wed May 03, 2006 9:23 am
by PGWLE
Looks well nice!

Posted: Wed May 03, 2006 9:40 am
by DanDiesel
looking good!!
Posted: Wed May 03, 2006 7:07 pm
by pettsy
looking smart! What kit have you got and how much was it?
Pettsy
Posted: Wed May 03, 2006 7:10 pm
by polofresh
its an evo technik kit from germany it a 60/60 kit but the back is adjustable in 5 positions i got it off ebay £150 for the kit and £20 postage pretty good me thinks

Posted: Wed May 03, 2006 9:44 pm
by rn1988
are evo technik's the kit that if for sale on ebay under the name tuning place or somethin like that? i was lookin at gettin some
Posted: Wed May 03, 2006 9:46 pm
by polofresh
rn1988 wrote:are evo technik's the kit that if for sale on ebay under the name tuning place or somethin like that? i was lookin at gettin some
yeh thats right mate fast delivery it only took a week

Posted: Wed May 03, 2006 9:53 pm
by rn1988
how does the 5 position lowering work?just different mounting holes or somethin?can you still get over speed bumps cus that is the concern with mine,my mate has got a 106 lowering 50mm on 13"s and he can get over them so i should be ok(fingers crossed)
Posted: Thu May 04, 2006 9:50 am
by polofresh
theres a cup that sits on a clip that you can take out and move up and down

its a bit annoying if you fit it and take your car off the jack only to realise its not low enough or something as you would have to take it all off again lower the cup and re fit it
