door card removal - 6n
Posted: Mon Jul 24, 2006 10:39 pm
basic question i know but is there a specific way of taking off the door cards or do they just pop off?
UK-POLOS.NET - THE VW Polo Forum
Probably the Worlds greatest Polo resource
https://uk-polos.net/
door card removal - 6n
Page 1 of 1
Posted: Tue Jul 25, 2006 12:31 am
all you gotta do is flip the cover on the interior door hadle off, do this with a flathead screwdriver or sumthin, then undo the two screws hidden behind the cover and then the card is basically held on by clips and the card should come off with a small amount of force. hope this helps!
Posted: Wed Aug 09, 2006 12:34 am
Dont mean too sound stupid ( but probably will) whats the door card?
Posted: Sat Aug 12, 2006 11:33 am
door card is the plastic trim on the inside of the door. i.e the bit on the door which makes up the interior! 
Hope that helps!
Hope that helps!
Posted: Tue Aug 15, 2006 10:08 pm
is this the same with the 6n2? i had the handle off plus the 2 screws earlier n the card still wasnt goin anywhere!!
Posted: Tue Aug 15, 2006 10:08 pm
is this the same with the 6n2? i had the handle off plus the 2 screws earlier n the card still wasnt goin anywhere!!
Posted: Mon Oct 30, 2006 10:09 am
i stick a screw driver near the top untill a pop then in the middle untill a pop then at the end untill a pop 
Posted: Mon Oct 30, 2006 10:09 am
i stick a screw driver near the top untill a pop then in the middle untill a pop then at the end untill a pop
Posted: Fri Nov 03, 2006 10:03 pm
right ive done this 5 times this week replacing my window mech so im gettin good.
flip off the grab handle cover and undo the 2 screws
then take a screwdriver to the winder handle,place it behind the handle and slide the trim ring up from it, youll see what i mean, this will then pull off.
then get a large flat blade or pry bar and insert under the edge below the pocket and pull CAREFULLY
then the rest will pop off
flip off the grab handle cover and undo the 2 screws
then take a screwdriver to the winder handle,place it behind the handle and slide the trim ring up from it, youll see what i mean, this will then pull off.
then get a large flat blade or pry bar and insert under the edge below the pocket and pull CAREFULLY
then the rest will pop off
Posted: Mon Apr 14, 2008 1:05 pm
Is this the same for the back doors? Just tried to get them off and I got the screws undone but couldnt get any further
Posted: Tue Apr 15, 2008 12:32 pm
Anyone? 
Posted: Fri Apr 18, 2008 10:45 pm
bumping this for later.willriseley wrote:right ive done this 5 times this week replacing my window mech so im gettin good.
flip off the grab handle cover and undo the 2 screws
then take a screwdriver to the winder handle,place it behind the handle and slide the trim ring up from it, youll see what i mean, this will then pull off.
then get a large flat blade or pry bar and insert under the edge below the pocket and pull CAREFULLY
then the rest will pop off
Posted: Mon Apr 21, 2008 5:44 pm
I did a guide for the front somewhere on here. Never got to finish the guide for the rears. For a 5 door that is. Had a few problems with it.
Edit: Link to Guide(It's near the bottom with pics)Clicky
Edit: Link to Guide(It's near the bottom with pics)Clicky
Posted: Mon Apr 21, 2008 5:49 pm
Thanks, would be really helpful as Ive got some speakers to go in if I can get the doors off!