Page 1 of 1
pioneer ipod interface
Posted: Thu Sep 07, 2006 10:15 pm
by X1_NBP
i want to wire up a pioneer ipod interface to my polos boot...i've been to some ICE shops and they tell me its not possible because the wires are too short but they may be able to be extended with cd changer wires so that there will be enough wire to put it in my boot...i have never seen one of these interfaces so can any lne tell me if this is possible?
Posted: Thu Sep 07, 2006 11:11 pm
by Mk2Adam
am i missing something? you wanna do something so that you can put your i-pod in your boot???

Posted: Fri Sep 08, 2006 4:06 pm
by X1_NBP
haha ye sounds stupid but yeh...i my glove compartment doesnt have a lock on it and its always got crap in it and putting stuff under your seats doesnt fool theives... i dnt ever use my ipod anyway so this way it can always stay in my car and out of sight of theives...
Posted: Fri Sep 08, 2006 8:21 pm
by knaps
If its compatable with your headunit you need the adaptor from Pioneer the part number is CD-RB10, it plugs into your stacker connection on the back of your headunit and then you can plug any RCA audio into it. So just get a long cable plug it into the adaptor and run the cable to the boot under the carpet and seats, hope this helps.
hope the link works....
http://www.pioneer.com.au/files/product ... 10_med.jpg
Posted: Fri Sep 08, 2006 8:25 pm
by knaps
Sorry had to do a double post, that part number I gave in the other post was the Australian part number. I looked on Pioneer.co.uk and the equivalent part is, iP-RCA...
http://www.pioneer.co.uk/images/product ... _large.jpg
Posted: Wed Oct 11, 2006 10:16 am
by jason11
i put mine under the glove box and put the wire through the centre gap then put my ipod their :)
Posted: Wed Oct 11, 2006 11:23 am
by knaps
mines just behind the headunit with a cable running to the glove box with a 3.5mm audio jack on it.