Page 1 of 1
alloy wheel will it fit?
Posted: Mon Oct 02, 2006 7:41 pm
by PoloGti_88
hi peeps, just need a quick help. i got this set of wheels PCD 4x100 and offset is 30 will this fit my mk4 polo? these alloys are off a bmw i presume as they state bmw lol. but will i need spacers or anything? cheers
Posted: Tue Oct 03, 2006 10:13 am
by mk4 glx 1.6
The PCD and offset you have stated are fine, but it also depends on the wheel width and centre bore size (which you don't state) as to whether they will fit without any complications. Do you know what these are?
Posted: Tue Oct 03, 2006 3:39 pm
by PoloGti_88
thx for that, i aint to sure about the centre bore but its 7" width, these came off a bmw e30 4 stud.
Posted: Tue Oct 03, 2006 6:51 pm
by vdubit
i had an old set of bmw bbs's and the centre bore was bigger than that of a vw, so you'd need spigot rings to get it to st perfect. That width, offset & size should be fine, it may scrape the outer arch very slightley if its proper low.