Page 1 of 1
CD Player Help...
Posted: Sat Oct 07, 2006 2:45 pm
by GingerGogs
Hi,
Have had a cheap CD player fitted in my car for about 3 weeks now after replacing the radio cassette and know I have missed something because as soon as I take the key out of the ignition, all the memory of radio stations disappears, meaning I have to search for a station everytiome I get in the car. Does anyone know what I need to do to solve this problem?
Also, I have been offered a twelve inch sub and amp to get some more noise on the go. Anybody willing to say how hard this is to fit?
Thanks for any help,
GingerGogs
Posted: Sat Oct 07, 2006 2:48 pm
by polocoupcl
try swapping the ignition and live wires over eg. usually live is red and ignition is yellow in which case try red to yellow and yellow to red.
Posted: Tue Oct 10, 2006 3:11 pm
by gina
It shouldn't be hard to fit a sub/amp, imlucky my bf's pretty handy when it comes to things like this so i just ask him!
Have you got anyone who could offer there services?
Posted: Tue Oct 10, 2006 5:18 pm
by mc_iver_9n
If u get an amp, i think this should remember what stations, also will remember what song and where abouts u were in the song. I'm no expert tho, this may only be with some headunits and amps. I have a JVC headunit with a JBL sub and amp. (i was like u before tho)
As for the sub and amp, Its pretty easy to wire together if u can get a diagram of the net or somthing to help u. I just couldn't find out how to wire the amp to the battery due to the good german build quality of the polo, and ended up drilling a small hole to the engine bay (although u can feed it through with the other wires).
hope this helps mate
Scott
Posted: Wed Oct 11, 2006 3:36 pm
by GingerGogs
Ta for the help everyone. The uncle who is kindly supplying the amp and sub is goin to do the install.
Posted: Fri Oct 13, 2006 8:04 pm
by solidsponge
same thing happened to me, the wires are the wrong way round. Its just a case of plugging them in different. Mines just a normal mp3 cd radio with ISO connection, but the red and yellow wires are wrong for the polo. It needs to be red > yellow (battery) and then yellow > red (acc) rather than red > red and yellow > yellow. Just unplug and plug them in
CONNECTION : red > yellow (battery 15a)
CONNECTION : yellow > red (acc)
You can only plug out those wires and they have a plug bit on to do so, so theres no special knowledge required etc.
Hope that helps