UK-POLOS.NET - THE VW Polo Forum

Posted: **Tue Dec 26, 2006 2:20 pm**

Does anyone have the experience in the problem of "Camshaft Position sensor" or "Hall sender" (part#4 in the diagram)

Posted: **Tue Dec 26, 2006 6:13 pm**

I had a fault with this once, well, it came up on the diagnostics. Chances are the sensor is fine. You either need a new timing belt as yours has stretched or your timing belt tensioner has gone (more likely). Buy a new timing belt kit and get it fitted, and stop diving the car!

Posted: **Wed Dec 27, 2006 8:23 am**

Mine went. It caused occcasional juddering when the car was warming up.

Posted: **Wed Dec 27, 2006 2:08 pm**

Part 4 isn't the Camshaft position Sensor

Part 8 is

Part 4 is the VVT control Solenoid

Posted: **Wed Dec 27, 2006 2:13 pm**

Well spotted. Quite correct, no.8's the cps

Posted: **Thu Dec 28, 2006 4:33 am**

If the VGA-COM show following fault code, the problem should come from
Part4 or Part8??

17935 - Camshaft Timing Adj. Bank1 (N205): Short to Ground
P1527 - 35-00 - -

Please help~

UK-POLOS.NET - THE VW Polo Forum

"Camshaft Position sensor" or "Hall sender&qu

"Camshaft Position sensor" or "Hall sender&qu