UK-POLOS.NET - THE VW Polo Forum

Posted: **Thu Apr 26, 2007 6:53 pm**

ive only got a 1.0 E and this dsnt cum wiv the cup holder under the double din storage bit

does any1 have an idea wher i can get 1 from?

Posted: **Thu Apr 26, 2007 10:23 pm**

Vag parts m8

Posted: **Fri Apr 27, 2007 12:11 am**

i got mine from a scrappy

Posted: **Fri Apr 27, 2007 9:41 am**

does it just screw into place?

Posted: **Fri Apr 27, 2007 8:33 pm**

Do you really use the cubby hole space? i bought a single din double cup holder off vag parts and fitted it myself - it was a doddle. Looks like this below

https://sslrelay.com/s74326199.oneandon ... 00x191.jpg

Posted: **Sun Apr 29, 2007 11:43 pm**

samil87 wrote:does it just screw into place?

mine did

.... that cubby hole one looks great!

Posted: **Mon Apr 30, 2007 12:04 am**

theres one in the glove box

Posted: **Mon Apr 30, 2007 7:04 am**

I too would like the cup holder, but as samil87 says, the one underneath that came on the GTIs and SEs (if i remember right

). Must give VAG Parts a call and see if they can help me out. Although to fit that one, a fair bit of the dash has to be removed unfortunately

Posted: **Mon Apr 30, 2007 9:22 am**

How much was that cubby hole space one polo_gio? looks much better that way, it's annoying just having one, when i got mates in the car and they all rush into my car so they can get the cup holder first

Posted: **Mon Apr 30, 2007 9:51 am**

Wasnt too much - roughtly Â£24 and it was worth every penny. I did have to remove my aftermarket headunit first as it lipped over the din slot. That wasnt too hard and i was done 5 minutes later.

Can you not make your central locking work with one press = drivers door open, two presses = all doors open. That way you could get in get the cup holder...then let your buddies in.......

Posted: **Tue May 01, 2007 12:27 am**

DannyMk5 wrote:theres one in the glove box

yes but that 1 is crap!! doesnt even hold the cups properly! haha

Posted: **Tue May 01, 2007 12:41 am**

Loopy-Chi wrote:
DannyMk5 wrote:theres one in the glove box
yes but that 1 is crap!! doesnt even hold the cups properly! haha

lol yeah i know, and it has to be a small cup, cant have a large macdonalds drink on there hehe

Posted: **Tue May 01, 2007 7:48 am**

so which 1 is betta the 1 that goes in the cubby hole or the 1 that comes on the SE's and GTi's?

Posted: **Tue May 01, 2007 9:07 am**

In my opinion, the one on the SE/GTi's (although its a remove a fair bit of the dash to fit job)

Ill be ordering one up this week through VAG Parts.

Posted: **Tue May 01, 2007 10:34 pm**

alexperkins wrote:In my opinion, the one on the SE/GTi's (although its a remove a fair bit of the dash to fit job) Ill be ordering one up this week through VAG Parts.

And S models

UK-POLOS.NET - THE VW Polo Forum

Cup Holders

Cup Holders