[phpBB Debug] PHP Warning: in file [ROOT]/ext/cleantalk/antispam/model/CleantalkSFW.php on line 184: Undefined array key 1
UK-POLOS.NET - THE VW Polo Forum • Changing wing mirrors
Page 1 of 3

Posted: Tue May 15, 2007 10:30 pm
by ModifiedMadness
I want to know the same :D

Posted: Tue May 15, 2007 10:34 pm
by ModifiedMadness
Have you ever taken the door card off?

It's a 2 minute job mate, really easy. I've done it about 4 or 5 times now :D

Posted: Tue May 15, 2007 10:45 pm
by ModifiedMadness
remove the small screw on the inside of the door, near the wing mirror

pop off the grab handle

remove the two gold screws, at top and bottom of grab handle

untwist and remove the lock knob at top of door

carefully prise, starting at the bottom, with something that wont damage the paint/door card - will start unclipping from the door metal itself

several clips all the way around, most likely stiff, so do tug hard but be carefull not to break them (cheap to replace anyway)

Posted: Wed May 16, 2007 9:18 am
by shantybeater
you have to take the door card off inorder to unclip the electric mirror cable & screw on from the inside, easy job though took me 5 mins

Posted: Wed May 16, 2007 10:36 am
by Silva_B!tch_Owner
Yep done this the other day, you have to take the door card off and there's a few screws behind where the tweaters are.

Posted: Thu May 24, 2007 6:24 pm
by ModifiedMadness
Just to let you know Alun, the mirror is a piece of cake to change.

Basically once the door card is off all you have to do is unplug the mirror, undo the 3 screws holding it in place, take the clip off of the plug (you'll know what I mean when you see it) then feed it through the sponge in the door (again you'll know what I mean when you see it)

One thing I'm not sure of though is how the hell the glass stays in it's place, if someone could help me with that I'd be very happy :D

Posted: Thu May 24, 2007 8:12 pm
by ModifiedMadness
I had to give it back to the painter because he hadn't quite sprayed enough of the inside, so you could still see it with the glass in place.

I've never personally had any trouble with that screw though :?

Posted: Thu May 24, 2007 9:53 pm
by ModifiedMadness
:lol: Yes mate, anti-clockwise.

Should have mine on tomorrow :D