Page 1 of 1
VR6 Brakes ?
Posted: Fri Jun 08, 2007 11:58 am
by sorted
Hello
I'm on the look for some g60 carriers, a set of VR6 carriers, discs and pads (all brand new) have popped up at the back of a mates garage - he says i can have them basically.
What i wanted to try find out is - are they going to fit the polo (poss the same as the g60 ones ?)
Anyone any ideas ?
Posted: Fri Jun 08, 2007 12:50 pm
by jj gti
the vr6 calipers and carriers are same as the g60s mate
Posted: Fri Jun 08, 2007 7:15 pm
by vdubit
em, no. If its from an early vr6 running 280mm disc (or passat vr6) then yes, it will fit. If its a later vr6 they ran 288mm discs thus they wont fit. Unless you can get some 5 bolt 288mm discs re-drilled to 4 bolt that is.
Posted: Tue Jun 12, 2007 11:36 am
by sorted
vdubit wrote:em, no. If its from an early vr6 running 280mm disc (or passat vr6) then yes, it will fit. If its a later vr6 they ran 288mm discs thus they wont fit. Unless you can get some 5 bolt 288mm discs re-drilled to 4 bolt that is.
How early would the Golf need to be mate?
Neildo.
Posted: Tue Jun 12, 2007 1:33 pm
by RICHARD HARPER
Can't you just measure disc diameter with tape measure or something ?
And another thing if there 5 stud discs, you'll no there no good without adaptors as there off later model
Or re-drilled holes (But may work out cheaper getting the 4 stud 280mm discs from a local motor factors)
But i'd think the carriers might still be ok....
Plus another thing what size of wheels you running ?
As for 280mm discs i think you'll need wheels of 15" and above
Good luck
