badge removal
Posted: Sat Jun 09, 2007 9:32 am
removed the polo lettering but can still see were it was stuck on. is t-cut the best thing to use to remove the lettering outline?
UK-POLOS.NET - THE VW Polo Forum
Probably the Worlds greatest Polo resource
https://uk-polos.net/
badge removal
Page 1 of 1
Posted: Sat Jun 09, 2007 10:02 am
bit of t-cut, bit of polish
Posted: Sat Jun 09, 2007 10:22 am
il give it a bash
Posted: Sat Jun 09, 2007 8:23 pm
ive tried just about everything available but cant my shadow away on my red polo
Posted: Sun Jun 10, 2007 9:44 am
having th exact same prob. tried t cut but didn't make much difference 
Posted: Mon Jun 11, 2007 9:25 am
Go with what Alun said, will do the trick 
Posted: Mon Jun 11, 2007 9:33 am
If you are getting white marks underneath them... I know a little trick which MAY help..
On the corsa c forum, people were getting white lines underneath where they had taken the side rub strips off, on some older cars that is sort of 2000-2003.
If you are getting white marks where your badges were t-cut etc wont work.
The white is caused by water getting into the laquer.
Nick your mums / sisters / gf's hairdyer or get a heatgun, and slowly heat up the paint where the white marks are.
DO NOT DO IT TOO CLOSE OR ON TOO HOT A SETTING AS THE PAINT WILL BUBBLE! But I did this on my corsa and it worked a treat.
On the corsa c forum, people were getting white lines underneath where they had taken the side rub strips off, on some older cars that is sort of 2000-2003.
If you are getting white marks where your badges were t-cut etc wont work.
The white is caused by water getting into the laquer.
Nick your mums / sisters / gf's hairdyer or get a heatgun, and slowly heat up the paint where the white marks are.
DO NOT DO IT TOO CLOSE OR ON TOO HOT A SETTING AS THE PAINT WILL BUBBLE! But I did this on my corsa and it worked a treat.