UK-POLOS.NET - THE VW Polo Forum

Hey All,

I'm currently in the middle of putting back my polo to standard, i've been in contact with VW as i need a security code for my standard HU. I suppose there isnt anyone who has access to these? Maybe works for VW or has a CD of some sort.

Thanks

Rich

If its the radio that came with your polo, just connect it up, start the engine let it run for a few mins then turn the radio on. It will say SAFE then it will say LEARN - and wahey it starts working. If it doesnt change to LEARN and goes to 1000, just turn it off and turn it on again

The only people who have access to the codes are VW, but its free to get them - ive sourced three or four different codes from them in the last 6 months

Hope this helps!

alexperkins wrote:If its the radio that came with your polo, just connect it up, start the engine let it run for a few mins then turn the radio on. It will say SAFE then it will say LEARN - and wahey it starts working. If it doesnt change to LEARN and goes to 1000, just turn it off and turn it on again

The only people who have access to the codes are VW, but its free to get them - ive sourced three or four different codes from them in the last 6 months

Hope this helps!

Hey Alex,

Thanks for the info i shall give this a try later!

VW here in aylesbury want to charge me £10 admin fee - hence me asking my fellow dubbers for Help

Ta

Rich

If it dont work, pm me your reg and vehicle chassis number (the WVW bit) and ill get it for free