ICE Install in my Polo - Hints and Tips desparately needed!
Posted: Sun Aug 12, 2007 10:04 pm
Hello, First post!
Ive just ordered the following:
Genesis Profile 2 Amp
SPL Dynamics SD-6.2 Component 165mm Speakers (rated highly by the people at TalkAudio) http://www.caraudiodirect.co.uk/dynamic ... -5523.html
Pioneer DEH-3900MP Head Unit http://www.caraudiodirect.co.uk/pioneer ... -5574.html
8AWG Wiring Kit + extra 5m speaker cable
Speaker Adapters for the MK6 03 Polo http://www.caraudiodirect.co.uk/speaker ... -5443.html
Wiring Harness for MK6 03 Polo
So..... Going about installing this, i have no idea really where to start.
Wanted to put the amp under the passenger seat but the floor is higher under the seat so theres not enough clearence between it and the bottom of the seat. Its a 3 Door and I saw in this thread http://www.talkaudio.co.uk/vbb/showthre ... light=polo that the amps can be put where the back doors would be, or I suppose it would hang from either side of the boot vertically?
I was reading on UK-Polos and someone said the OEM speakers are riveted on!!! So I need to drill them out? How do I screw in the speaker adapters?!?!
So any hints and tips about running cable through the car, taking the door panels off, the a pilars to pieces and mounting the amp/HU would be really really appreciated!
Best Regards
Ive just ordered the following:
Genesis Profile 2 Amp
SPL Dynamics SD-6.2 Component 165mm Speakers (rated highly by the people at TalkAudio) http://www.caraudiodirect.co.uk/dynamic ... -5523.html
Pioneer DEH-3900MP Head Unit http://www.caraudiodirect.co.uk/pioneer ... -5574.html
8AWG Wiring Kit + extra 5m speaker cable
Speaker Adapters for the MK6 03 Polo http://www.caraudiodirect.co.uk/speaker ... -5443.html
Wiring Harness for MK6 03 Polo
So..... Going about installing this, i have no idea really where to start.
Wanted to put the amp under the passenger seat but the floor is higher under the seat so theres not enough clearence between it and the bottom of the seat. Its a 3 Door and I saw in this thread http://www.talkaudio.co.uk/vbb/showthre ... light=polo that the amps can be put where the back doors would be, or I suppose it would hang from either side of the boot vertically?
I was reading on UK-Polos and someone said the OEM speakers are riveted on!!! So I need to drill them out? How do I screw in the speaker adapters?!?!
So any hints and tips about running cable through the car, taking the door panels off, the a pilars to pieces and mounting the amp/HU would be really really appreciated!
Best Regards