How wide can ya alloys be on a 9n??
Posted: Tue Oct 30, 2007 7:36 pm
Just wonderin how wide ya able to have alloys on a 9n without havin to play with arches etc??
Cheers, tim.
Cheers, tim.
UK-POLOS.NET - THE VW Polo Forum
Probably the Worlds greatest Polo resource
https://uk-polos.net/
How wide can ya alloys be on a 9n??
Page 1 of 1
Posted: Tue Oct 30, 2007 9:56 pm
no more than 9 inches, possibly 8
Posted: Tue Oct 30, 2007 9:59 pm
i think 9 inch absolute max but like david said, nearer 8
Posted: Wed Oct 31, 2007 1:25 pm
i had 8.5 inch keskins on the ibiza with an ET30 (i think) for a while and these were right out at the arch level, front and back. if i'd kept them, i would have had to flare the arches!
Posted: Wed Oct 31, 2007 5:12 pm
mine r 9 inches wide but i have 205 tyres on, they r fine 
but if u kept the 225 tyres then they wud prob rub the inner arch u wil get away with 215 but stick with 205 to be 100% sure and the handling with these are awesome 
but if u kept the 225 tyres then they wud prob rub the inner arch u wil get away with 215 but stick with 205 to be 100% sure and the handling with these are awesome Posted: Wed Oct 31, 2007 8:14 pm
im running 7.5" audi tt comps with 205/40/17 toyo proxes with absolutely no issues, and im down 55 mm front and 50 rear, no rubbing, full lock is fine too,
but i cant say how much wider you could go, as i had these same wheels in the past with 215/40/17 tyres and they rubbed like a b***h going over bumps or dips in the road
but i cant say how much wider you could go, as i had these same wheels in the past with 215/40/17 tyres and they rubbed like a b***h going over bumps or dips in the road
Posted: Sat Nov 03, 2007 6:35 pm
depends on the offset, if you had RH's or something you could get 10s on