Page 1 of 1
Hella Adapter Cable
Posted: Sun Jan 20, 2008 7:48 pm
by Manni
Anyone know a site that sells the hella adapter cable? The cables used to convert the 9n3 rear lights onto the 9n. Thanks
Posted: Sun Jan 20, 2008 8:08 pm
by stig247
you dont really need this, you can just change the wiring configeration yourself
DIY Guides » 9N3 rear lights on a 9N RHD cars
Posted: Sun Jan 20, 2008 8:18 pm
by Manni
Yea, I tried, but i cant seem to get the pins out
Posted: Sun Jan 20, 2008 10:03 pm
by ihpj
I'm very tempted to do this MOD - but I'm not convinced the wires will all pull out (and re-thread) as easily as its made out. My worse case scenario is that I will shag one (or more) of the wires as I try to tease them out and screw the whole loom
I would much prefer the adaptor (if there is one) or leave well alone!
Posted: Sun Jan 20, 2008 10:48 pm
by creasegt
go and have an ask in your local lucas/lsuk....i kno we deal alot in hella
Posted: Mon Jan 21, 2008 8:11 pm
by RUM4MO
Manni wrote:Yea, I tried, but i cant seem to get the pins out
Yes I sympathise with you on this - it sounds easy but unless you develop the correct knack and use suitably sized/shaped extract tools there is always the possibility of breaking the retainer on a few pins. I fitted a proper VW lane changer convenience kit on my Passat, it involved depopulating one connector and populating a new one - and it certainly tried my patience - in the past at work I've dealt with quite a lot of high density connector pin extraction/refitting.