Page 1 of 1

ta-techix coilies adjustment.....?

Posted: Wed Feb 13, 2008 9:59 pm
by dave-g
hey all,

ive recently bought a set of these coilovers, but have no idea on how to adjust the backs? its got the two springs on them, with 3 adjusters sort of things?
it's not just a case of turning the plates with the c-spanner, because the back is unwound as far as it can go!!! any help/guides appreciated!!!! 8)

Posted: Thu Feb 14, 2008 2:50 am
by Dee-vub
Aye thats adjustables at the rear you have! Its a sort circlip that your bottom spring plate sits on....to adjust the height, you need to take of the circlip and to go to its lowest seting you put it to the furthest down space! the sspring will appear longer but compresses alot more to getit lower. The ride although is a bit more.....em bouncy. To go higher you moce the circlip to the top.....this shortens the spring but gives much less compression making it sit higher but gives a harder ride.

hope that hekps mate :)[/list]