UK-POLOS.NET - THE VW Polo Forum

Posted: **Tue Feb 19, 2008 7:39 pm**

Right. The trip computer switch is a bit sticky so im thinking of replacing the RHS indicator stalk.

Looked in Haynes cant see the answer unless im looking under the wrong section

Is tis fairly easy job to do or is it steering wheel off etc etc. A method or any hints and tips would be very usefull.

Also. Are the LHS and RHS stalk units individual or are they one unit as im thinking about retro fitting cruise control

Posted: **Tue Feb 19, 2008 8:34 pm**

Both stalks are individual and cruise can be retro fitted (just done it on my Golf)

It is a steering wheel off job to do though.

Posted: **Tue Feb 19, 2008 9:08 pm**

Thats ghey

. Cheers for the reply though

Posted: **Tue Feb 19, 2008 11:57 pm**

is cruise just a plug and play stalk then or does it need setting up with vagcom or similar then?

i assume the process for the 9n and 9n3 would be the same

Posted: **Wed Feb 20, 2008 12:13 am**

i believe that it takes some setting up on VAGcom

theres a guide here for a Skoda but you need to login

http://www.vagweb.co.uk/forums/about577 ... 845546718b

Posted: **Wed Feb 20, 2008 10:51 am**

Anyone feel like copying that guide over?

Posted: **Wed Feb 20, 2008 5:21 pm**

I needed an extra loom on the Golf and it does need activating in VAG-COM

Posted: **Wed Feb 20, 2008 6:32 pm**

do you know if all models have it on the ecu its just a case of it hasnt been activated?

Posted: **Wed Feb 20, 2008 7:42 pm**

Im sure they do as they are all drive by wire (but dont hold me to it!!)

UK-POLOS.NET - THE VW Polo Forum

Indicator Stalks/ Cruise Control

Indicator Stalks/ Cruise Control