Page 1 of 1
Removing 9N rear bumper? How to please?
Posted: Wed Feb 20, 2008 3:36 pm
by TimGti
Need to remove and refit to allow me to put on my colour coded bump strip on the rear.
Sure its straightforward but is always easier when you know what your doing!
Anyone please?
Posted: Wed Feb 20, 2008 3:58 pm
by dino
I can have a look in the Haynes Manual which I have for sale if no one beats me to it (at work currently);
http://www.tigerstyle.co.uk/poloforum/v ... hp?t=35660
Posted: Wed Feb 20, 2008 4:19 pm
by Hamish
1. Remove rear lights
2. Remove the 2 bolts below each rear light
3.In the rear wheel arches remove the 4 mounting screws from the ends of the rear bumper
4. Remove the 3 mounting bolts on the underside of the bumper
5. With an assistant, ease the edge of the bumpers from the guides.
6. Disconnect the rear number plate light
Types ftom haynes. Sorry Dino
Posted: Wed Feb 20, 2008 5:26 pm
by TimGti
Cheers Lads, will get to do this over the weekend hopefully!
Posted: Mon Feb 25, 2008 9:54 pm
by ihpj
Did you give this a go mate?
I'll be replacing my Mums rear bumper in the coming weekend (or two!) so would appreciate your feedback on how you found it
Seeing as its Mums car - don't want to break anything you know
Posted: Mon Feb 25, 2008 11:04 pm
by TimGti
ihpj wrote:Did you give this a go mate?
I'll be replacing my Mums rear bumper in the coming weekend (or two!) so would appreciate your feedback on how you found it
Seeing as its Mums car - don't want to break anything you know
Yeah did it yesterday and fitted my painted bumpstrip. Taking the bumper off is extremely easy and you cant really go wrong TBH. Getting the bump srtip off was a two man job for sure, but not too bad.
It got dark when I had it off the car so I took it into my house and gave it a good polish, fitted it again this morning
Posted: Tue Feb 26, 2008 9:42 am
by ihpj
Sounds good enough then, thank you!