Page 1 of 2

Interior grab handles - what have you done ?

Posted: Tue Mar 04, 2008 3:00 pm
by sorted
AS the title says, has anyone painted them red / black / green / purple ? Or is everyone just replacing them every few months when they get horrible looking?

Posted: Tue Mar 04, 2008 3:23 pm
by h4r1s
painted mine black 8)

Image

Image

Posted: Tue Mar 04, 2008 3:27 pm
by sorted
How are they holding out ?
How did you do it ?

Neil

Posted: Tue Mar 04, 2008 3:59 pm
by Mouse_GTI
I replaced mine. Still look as good as new. I'm very careful with them

Posted: Tue Mar 04, 2008 4:46 pm
by h4r1s
sorted wrote:How are they holding out ?
How did you do it ?

Neil
sanded them down with some wet and dry, got rid of all the flakey bits, and used some satin black paint from homebase.

they are holding up well, they don't flake or anything and just look oem, no one notices them.

Posted: Tue Mar 04, 2008 4:55 pm
by MaxZ
I've replaced mine, they should last a good few years at least.

Posted: Tue Mar 04, 2008 6:00 pm
by Tim_GTi
Mouse_GTI wrote:I replaced mine. Still look as good as new. I'm very careful with them
Ditto, although they are made out of crap material I do love the look and feel of them

Posted: Tue Mar 04, 2008 6:11 pm
by ModifiedMadness
Mine are still mint, I've had the car 2 years.

One of the inserts in the grab handles has been replaced but that's because I snapped it in half :oops:

Posted: Tue Mar 04, 2008 7:22 pm
by bbspolo
painted my handles and speaker covers looks very oem! slowly but surley making the inside completley black like mk4 anaversiary golf!

Posted: Wed Mar 05, 2008 7:57 pm
by Si_GTi
I considered painting mine, but will be just putting two standard new ones in. I too snapped one of the inserts (driver's side) after failing to prise it off carefully :lol: but they are only a couple of quid from the dealer to replace.

Posted: Wed Mar 05, 2008 7:59 pm
by Tim_GTi
Si_GTi wrote:I considered painting mine, but will be just putting two standard new ones in. I too snapped one of the inserts (driver's side) after failing to prise it off carefully :lol: but they are only a couple of quid from the dealer to replace.
Yeh I'm pretty sure vagparts do a whole front set (2 inserts and 2 handles) for a decent price!

Posted: Thu Mar 06, 2008 8:21 am
by nogwuy
mine are pretty flaky, might just try peeling off all that rubbery coating. if it looks crap then i will replace them. :wink:

Posted: Thu Mar 06, 2008 3:43 pm
by one_must_fall
Tim_GTi wrote:
Si_GTi wrote:I considered painting mine, but will be just putting two standard new ones in. I too snapped one of the inserts (driver's side) after failing to prise it off carefully :lol: but they are only a couple of quid from the dealer to replace.
Yeh I'm pretty sure vagparts do a whole front set (2 inserts and 2 handles) for a decent price!
~£30

Posted: Thu Mar 06, 2008 6:42 pm
by Tim_GTi
nogwuy wrote:mine are pretty flaky, might just try peeling off all that rubbery coating. if it looks crap then i will replace them. :wink:
I think you'd have to paint them after stripping them,

£30?! I paid less for that when I bought All mine individually.

Posted: Thu Mar 06, 2008 9:22 pm
by frankeygsxr1000
nice job h4r1s them handles look sweet so did you just use lite grade wet and dry ???

and what spray did you use just car grade spray??

gonna do mine as there a mess look like a snake sheading skin ....any good advice on the job??