polo9n mk6.5 front end swap
Posted: Fri Mar 14, 2008 8:54 pm
here is a step by step photos as i done the car
got the panels all brand new off a new car that fell off the back of a transporter and was never driven woo hoo
ready to start

removed bumper ,lights,grill, and started taking off slam panel

front all off now

now i started fitting the new front so i could drive it down to the body shop for them to take it off again and paint it and re-fit it

day one over got the two wings on and bonnet all going to plan bolt for bolt swap so far

slam panel/front carrier and new radiator now all fitted

time for a snag didn't all go to plan
the head lights would not fit because the inner wing was stopping them going in so i had to cut about 2"inches off the inner wing for them to go in so i had to take it all back off again and re-fit it
right so now got the lights in but the bumper would not line up took us nearly all day to get it right the 9n inner wing brackets were different so we had to bend them to shape

done woooo hoooo now time to take it the body shop and for them to take it all off again lol



now at body shop the ice house in stoke ready for painting

little ding on my door got sorted

bumper with center of it painted gloss black and blue motion bottom splitter fitted

bonnet

nearly done

ready for a polish


no more side repeater the joy of the swap now smoother

cars all done
went and got a new wind screen fitted old one got chipped and cracked :badgrin:
:p

now back home all done time to fit coilovers
and get it lower


FK highsports


thanks for looking
if you got any photos please post them up from the weekend
got the panels all brand new off a new car that fell off the back of a transporter and was never driven woo hoo
ready to start

removed bumper ,lights,grill, and started taking off slam panel

front all off now

now i started fitting the new front so i could drive it down to the body shop for them to take it off again and paint it and re-fit it

day one over got the two wings on and bonnet all going to plan bolt for bolt swap so far

slam panel/front carrier and new radiator now all fitted

time for a snag didn't all go to plan
the head lights would not fit because the inner wing was stopping them going in so i had to cut about 2"inches off the inner wing for them to go in so i had to take it all back off again and re-fit it
right so now got the lights in but the bumper would not line up took us nearly all day to get it right the 9n inner wing brackets were different so we had to bend them to shape

done woooo hoooo now time to take it the body shop and for them to take it all off again lol



now at body shop the ice house in stoke ready for painting

little ding on my door got sorted

bumper with center of it painted gloss black and blue motion bottom splitter fitted

bonnet

nearly done

ready for a polish


no more side repeater the joy of the swap now smoother

cars all done

now back home all done time to fit coilovers


FK highsports


thanks for looking
if you got any photos please post them up from the weekend