black grille badge
Posted: Wed May 21, 2008 12:07 pm
do these exist for the gti? or do you have to get one sprayed yourself
UK-POLOS.NET - THE VW Polo Forum
Probably the Worlds greatest Polo resource
https://uk-polos.net/
black grille badge
Page 1 of 1
Posted: Wed May 21, 2008 12:31 pm
Posted: Wed May 21, 2008 1:25 pm
looks good!! bit steep the price though!!! they should do an exchange thingy!
Posted: Wed May 21, 2008 1:29 pm
cheers for that kenny...tempting 
Posted: Wed May 21, 2008 3:55 pm
Am not keen on them, Makes the front look odd as if the badge is missing if ur lookin from a distance!? Would look better if the inside was painted the same colour as ur car and maybe round the outline of the VW
Posted: Wed May 21, 2008 4:24 pm
as you can see by my sig i'm a black grille badge fan 
Posted: Fri May 23, 2008 10:22 am
Mate~loud wrote:as you can see by my sig i'm a black grille badge fan
Just DIY it
It is so easy, it only take u 10 mins to take it off
Here is mine:
I do black and white LOL not all black
Sorry for the quality (a little out focus)
Posted: Fri May 23, 2008 10:40 am
Heres mine, just painted the inside tho 
Done the back too, hard to see sorry
Done the back too, hard to see sorry
Posted: Fri May 23, 2008 11:42 am
KennyPOLO_Gti
Very nice and sexy red!! lovely
Very nice and sexy red!! lovely
Posted: Fri May 23, 2008 5:46 pm
sexual lol how do i paint the back one inside the badge???? been wanting to do it but not shure how2 cheers#
Posted: Sun May 25, 2008 8:32 pm
If its anything like the mark5 badge. You just:
Remove the badge with a hairdryer and pulling it
Remove the glue points on the back of the badge using something like a stanley knife.
The front will then seperate from the back.
Spray back of the badge
Re-attach front and back using a glue gun
re-attach badge to car using trim repair from Halfords
Remove the badge with a hairdryer and pulling it
Remove the glue points on the back of the badge using something like a stanley knife.
The front will then seperate from the back.
Spray back of the badge
Re-attach front and back using a glue gun
re-attach badge to car using trim repair from Halfords
Posted: Mon May 26, 2008 4:52 am
This is mine. Sorry not the best pic.
I took the badge out then covered it with matt black vinyl. Pulling it tight so there are no bubbles.
I used vinyl because its cost $10 for a square meter so thats about 4 squid for you Poms. If I didn't like it I could just peal it off and have the chrome back again. Where if you paint it your stuck with it.
The rear badge is another matter
I took the badge out then covered it with matt black vinyl. Pulling it tight so there are no bubbles.
I used vinyl because its cost $10 for a square meter so thats about 4 squid for you Poms. If I didn't like it I could just peal it off and have the chrome back again. Where if you paint it your stuck with it.
The rear badge is another matter