Page 1 of 1
Keskin Question and Wheels suggestions anyone (dish needed)?
Posted: Thu May 29, 2008 4:31 pm
by morris_GTI
Sup dudes,
Im looking at getting some Keskin Kt4's 16" next month - 9" on the rear and 7.5" on the fronts
Dont suppose anyone knows how many inches of dish will be on the 9"s ?
i want as much dish as possible seee ;p
Posted: Thu May 29, 2008 9:35 pm
by Tim_GTi
Du know how much work you'll have to pull off to run 16X9s on the rear?
Posted: Thu May 29, 2008 10:19 pm
by morris_GTI
lol !
i know there may be some archwork involved, i know a local company that can do that....
is it going to be a f****r then ?
Posted: Thu May 29, 2008 10:22 pm
by Tim_GTi
It'll be an absolute nightmare mate. I really don't think it would be worth it.
The 6N2 wouldnt look right with wheels that big
Posted: Fri May 30, 2008 8:20 am
by morris_GTI
oh shiz!
ah i dunno mate, i've been in a wheel predicament for like the last month
what else is there with DISH that looks god on the GTI ?
Anyones ideas are most welcome (budget is about £800)
Posted: Fri May 30, 2008 8:27 am
by Tim_GTi
ATS cups, BBs RMs, BBS RSs, RH Cups, Borbet As, Borbet Ts, Brock B2s, Compomotive CXN-lines, Compomotive TSs, Most alloys in the HTN line, Kerscher Camonas, Steffan RSs.
There really are laods, all that list is just from looking at the dubmeister website. There's plenty out there. If your going for wide dish I really wouldn't look at 16"s though. Stick to 15"s or maybe even 14"s
Posted: Fri May 30, 2008 9:40 am
by morris_GTI
thanks for that list dude, thats given me plenty to look at
!
Realistically i'm looking at 8x14/15's then ?
Posted: Sat May 31, 2008 1:22 am
by kipper
Tim_GTi wrote:ATS cups, BBs RMs, BBS RSs, RH Cups, Borbet As, Borbet Ts, Brock B2s, Compomotive CXN-lines, Compomotive TSs, Most alloys in the HTN line, Kerscher Camonas, Steffan RSs.
There really are laods, all that list is just from looking at the dubmeister website. There's plenty out there. If your going for wide dish I really wouldn't look at 16"s though. Stick to 15"s or maybe even 14"s
just a small list.......... i was thinking of going for brock b2's or similar. i have seen a couple of deep dish wheels i like but not sure wat yet..... once i got my new wheels then im gonna lower it so its just right..... got my coilies fitted so thats the hard part done.......
Posted: Sat May 31, 2008 9:31 am
by colour_concept
Tim_GTi wrote:ATS cups, BBs RMs, BBS RSs, RH Cups, Borbet As, Borbet Ts, Brock B2s, Compomotive CXN-lines, Compomotive TSs, Most alloys in the HTN line, Kerscher Camonas, Steffan RSs.
add schmidt moderlines to the list as well
Posted: Sun Jun 01, 2008 6:20 pm
by Tim_GTi
Yeh the moderlines are niice
morris_GTI wrote:
Realistically i'm looking at 8x14/15's then ?
Yeh realistically 15X8 would be the largest to go for, maybe 8.5s on the rear.