UK-POLOS.NET - THE VW Polo Forum

Hi, can anyone post pictures of a grill with the red line around it. and whats the best way to do the red line?? thanks

Pics below.

Mines done with tape but unfortunately its no longer available as alot of people have found so your probably best spraying it.

I've heard a few people use red electrical tape and some have heated it up?

Not sure how well it works though!

this friday i going to paint this line with premier and then a red color

i'll make a guide with a step by step pictures once and for all

Red beading is by far the bet method to use



It looks so much more genuine than paint or tape

heres something i done on MS Paint

The beading is best, or some red electrical wire, just slit once al the way down and fold it on, maybe with a little glue if its not really tight!

If your going to go with the tape option, get this

http://www.halfords.com/webapp/wcs/stor ... ryId_84380

It's much more vibrant than electrical tape.

found this, dont know what it like tho.

http://cgi.ebay.co.uk/VW-Lupo-GTI-Grill ... 286.c0.m14

chewy wrote:found this, dont know what it like tho.

http://cgi.ebay.co.uk/VW-Lupo-GTI-Grill ... 286.c0.m14

Yep, that's the beading stuff

ello

ive jus had ma new grille come and earlier in the day i was lucky enough to lets say aquire some green beading while on site where i was working

but how do i put it onto the grille cause there isnt a gap or anything

someone said slice it in half and then im guessing you push it in on the edge of the grille

is this correct??

ad

There should be a slight gap between the bumper and grill, look how it fits on mine. I secured the beading to the inside of my grill with tape so it doesnt flal out

arrrr

wot did u stick it too the lip on the bottom edge?

Hang on a sec, is your beading simply a tube? or does it look like this

just a tube thts why i thought simply cut a slit all the way down

i didnt pay for it so couldnt be too picky lol